FrontHandlebars, F forks, headlights, etc.

●The front area has been extended to a long fork, but not too much. The handle has been changed to a relaxed position that is not tiring, and all switches and other parts are bolt-on parts. It’s a clean finish that is a standard even for fully customized 2%ER vehicles.

【Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]” ￥17800 (excluding tax)

〇High-quality stainless steel fork joint.

“Front Fork Dust Seal”　￥2400 (excluding tax)

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is lengthened.

“Welding Side Stand Extension Plate”　￥3200 (excluding tax)

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Handle/Handle Area】

“STD Robot Handle 7/8 inch (22.2mm)“

〇A very standard, traditional, and simple Z-bar handle packed with 2%ER’s know-how.

“Trail Enduro Grip” ￥1300 (excluding tax)

“Amal type throttle holder, general purpose (for 7/8″)” ￥3800 (excluding tax)

“1000mm Throttle Cable” ￥2500 (excluding tax)

“Special Tong Brake Cable 400mm Long” ￥4800 (excluding tax)

“300mm Long Clutch Cable” ￥2000 (excluding tax)

【Switch】

“Mini Blinker & Dip Switch Coupler On Kit (’85-00)”　￥5260 (excluding tax)

〇A simple-to-install switch kit that can be assembled with a coupler on. It operates the headlight Hi/Lo, horn, and blinker.

“MOTOR ROCK Decompression lever“　￥4500 (excluding tax)

〇A decompression lever directly attached to the engine to simplify the area around the handle.

【Tire】

“SHINKO flute 3.00-18“　¥12800 (excluding tax)

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

【Meter】

“Extension meter cable joint“　￥1900 (excluding tax)

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

● The body and exterior are finished with the bare minimum bolt-on parts.

We used a black-painted original gas tank, a classic semi-up muffler, and a comfortable seat with an old-school design.

With the mid-high position that allows weight distribution, you will have an outstanding comfort and cool riding posture, making it less tiring even for long-distance runs.

【Muffler】

“Semi-Up Drag Pipe Muffler“　¥31000 (excluding tax)

〇An up-muffler that is slip-on mounted on a normal exhaust pipe.

【Seat】

“Old School Double Seat”   ¥41000 (excluding tax)

○ This is a standard seat for 2%ER’s normal frame custom, with features that are difficult to express in mass-produced items, such as button-down and thick urethane that still looks stylish.

【Step】

“Drilled Mid-High Step Kit/Parkarize“　￥62500 (excluding tax)

〇A cool riding posture, a position that is extremely less tiring, this step kit is indispensable for 2%ER’s custom, it’s a new product with a drilled design.

“Genuine Gas Tank/Side Cover”

〇Aging paint by the world-renowned patina painter “BACON“.

【Drive System】

“Front sprocket SR400/500 428-19“　¥2000 (excluding tax)

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●The rear area is lowered with a 280mm suspension and fitted with the classic watermelon pattern tires.

We’ve added a sissy bar to the rear fender of a decent length, which can carry a lot of luggage.

【Rear Shock】

“Lowered Rear Shock“　¥26,000 (excluding tax)

〇A 280mm rear shock made by Daytona. It lowers the height by about 4cm (removal of the original chain case is necessary).

※At 2%ER, we usually use the following rear shocks.

“280mm G-Suspension/Chrome“　¥26,250 (excluding tax)

〇A rear shock that lowers the height by about 4cm. Among the lowered suspension, it moves well. (removal of the original chain case is necessary)

【Sissy Bar】

“YAMADA Long Sissy Bar (Sissy Bar) Bolt-On Kit” ￥52000 (excluding tax)

〇The old school design sissy bar kit. You can load a lot.

【Rear Tire】

“LOADSTAR TIRE 4.50-18“　¥14500 (excluding tax)

〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.

【Tail Lamp】

“Lucas tail lamp with pedestal Japanese standard number size“　¥8600 (excluding tax)

◯ This tail lamp is easy to use with a Japanese standard number size, while having the atmosphere of a good imported body. It requires hole drilling in the rear fender.

“Aluminum Back Plate for Number Plate Reinforcement“

〇 A 2mm thick aluminum plate for reinforcing a number plate that is already starting to crack or to prevent cracking.

【Drive System】

“Rear sprocket SR400/500 428-56“　￥4000 (excluding tax)

〇A durable sprocket made of steel.

“O-ring chain 428-130L“　￥9000 (excluding tax)

〇A replacement drive chain with built-in O-rings.