FrontHandlebars, F forks, headlights, etc.

【Front Tire】

『LOADSTAR TIRE 4.00-18』

〇Classic watermelon pattern, high vintage style tire

【Headlight】

◯The headlight is a modified 7-inch model for Harley. Instead of using vintage, we aged a bright current H4 bulb and mounted it high.

【Handle/Handle Area】

“Old Racer Bar Handle 7/8” (22.2mm)“

“Amal type throttle holder, general purpose (for 7/8″)“

◯ We have minimized the control parts such as the “Grimmeca Style Brake Master” (discontinued) and mini switches, resulting in a clean and simple finish.

“Top Bridge for Bar Handle“

◯ Compared to the stock, the handle clamp position is more than 2cm lower, which helps to shape the overall silhouette of the vehicle.

“Handle Lock Weld On Kit“

● It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle

【Front Blinker】

“Small Rubber Winker Smoke Set of 4“

“Diamond Winker Stay Front Black SR400/500“

◯It is attached to the lower part of the frame.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

◯We have created a simple drag pipe muffler.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Seat】

“Narrow Type Bates Replica Solo Seat/Pillion Pad Set in Black“

〇A narrow solo/pillion pad with a flat base. Despite being vinyl leather, it’s a seat with a good atmosphere. The spring input position and angle settings, as well as the pillion pad mounting position, are unique to 2%ER and are set to minimize fatigue.

“Welding nut non-through M8 2p“

〇Used on the frame side as a seat spring receiver.

【Electrical Equipment】

◯Since it’s a high-year model, bulky electrical equipment and wiring are stored in a custom-made electrical box that is easy to maintain with a hinged design.

【Gasoline Tank】

“Circle Gas Cap“

◯A gasoline tank that has been modified to narrow the width of a 3.5-gallon tank for Harley. The gas cap used is the stylish “Circle Gas Cap”.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Hardtail】

“Rigid Line” Bolt-On Hardtail Kit” (5cm Long)

〇As the name suggests, it’s a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to make it a rigid line. You can revert it back to the swing arm/rear shock specification during vehicle inspection or when changing styles.

【Rear Tire】

“LOADSTAR TIRE 4.50-18“

〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.

【Rear Fender】

“5-Inch Custom Rib Fender – Steel Material“

“Reinforcement Back Plate for 5-Inch Rib Fender“

〇A thick and durable rib fender. A reinforcement plate is added around the mounting holes to make it even more robust.

【Tail Lamp】

“Replica CROCKER Tail Chrome“

【Sissy Bar】

◯The bayonet design sissy bar is a one-off production combining square rods, hexagonal rods, and flat plates.

【Rear Blinker】

“Small Rubber Winker Smoke Set of 4“

“Weld tab S size 4.5mm thick steel 2p“

〇Welded to the hardtail. Used as a blinker base.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.