FrontHandlebars, F forks, headlights, etc.

【Front Wheel】

“H-shape aluminum rim SR front standard size“

〇A luxurious H-section aluminum rim often used as the finishing touch on exteriors from racers to choppers. Equipped with a 3.00 size vertical groove tire.

“Front Disc Hub Caps Starburst“

〇A starburst design hub cap that fits into the right side of the disc hub.

“Front Disc Rotor TRAD type1   `01～”

〇A classical design disc rotor made by Sunstar, old model type.

【Front Tire】

“SHINKO  flute  3.00-18”

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when the fork is lengthened. It is a small diameter and round 3.00 size.

【Front Fender】

“CHUCK BOX Front short fender Stainless steel for SR400/SR500“

◯The mounting stay part was remade and re-mounted closer to the tire.

【Headlight】

“Sportster Type Headlight”

〇A headlight with a visor and a bright H4 bulb. It’s a convenient headlight that can store a lot of wiring in the body. By using the “Round Top Headlight Lens” (discontinued) with a spherical lens, we emphasized a more American style.

【Handle/Handle Area】

“2%er Stainless Steel Separate Handle“

“Top Bridge for Separate Handle”

〇Classic style top bridge without holes for bar handle.

“Amal type throttle holder, general purpose (for 7/8″)“

〇A very simple, classic vintage style throttle.

“Chrome British Car Type Clutch Lever“

“Handle Lock Weld On Kit“

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

【Front Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“

“Diamond Blinker Stay“

◯The blinker is attached to the bottom of the frame.

CenterTank, oil tank, seat, step, muffler etc.

•Unlike the 60’s British style, the exterior is a bit modern and linear. The frame under the seat is a straight loop frame to the end, which was hand-bent using thick steel material and welded to be level with the ground.

【Muffler】

“All Stainless Exhaust Pipe“

◯ The bending angle has been gently adjusted, and a 4-inch Super Trap muffler is installed horizontally, like a drag racer, for an extended length.

【Step/Shift】

◯ The chrome-plated backstep, which involves a slight change in position, is a prototype designed with the future expansion of regular parts in mind. In this vehicle, additional processing is applied to the pedal part of the brake pedal to enhance the atmosphere.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit“

〇Your slow SR will be dramatically transformed. It’s a carburetor that’s easy to handle with sharp and smooth acceleration.

“Manifold Kit for FCR39φ”

〇It’s a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

【Kick Pedal】

“Groove Kick Pedal“

【Electrical】

◯Although the 2007 model has many wirings and electrical components, everything is stored in the electrical box under the seat, making it well-organized and easy to maintain.

【Gasoline Tank Installation】

◯The gasoline tank is mounted horizontally by modifying the normal bottom plate and adjusting the mounting stay positions at the front and rear. The gasoline cap is a flush cap from a Kawasaki Vario that has been modified and reused. It was finished with chrome plating, paint, and pinstriping.

RearFenders, rear shocks, swingarms, etc.

【Rear Wheel】

“H Aluminum Rim SR Rear Standard Size“

◯The rear wheel is the same Excel H rim as the front. The tire selected is AVON.

“Rear drum starburst cover SR400/500“

◯Added to the rear brake panel.

【Rear Shock】

◯The rear shock is adjusted for ride height by creating a block on the short-stroke billet suspension to avoid interference between the frame and the tire.

【Swing Arm】

◯In order to emphasize the low and long form, the swing arm is finished with chrome plating after extending the stock by 7cm.

【Seat Cowl】

◯The seat cowl is made of hammered steel. The round tail lamp is mounted with frenching to preserve the design, and it is finished with the same chrome plating, paint, and pinstriping as the gas tank.

【Rear Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“