Home » #320 SR400

#320 SR400

2024.10.7

Custom Bike

#320 SR400Custom Report

An SR400 long fork style, assembled entirely with bolt-on parts.

We’ve finished it off by converting everything to original bolt-on parts, combining the casual chopper style, the fun of riding with an FCR carburetor, the ease of footing, the comfort of the handle and step positions, and the coolness of the riding posture.

■About Vehicle Inspection

. (F Turn Signal Position Change)

. Muffler Replacement or Core Filling

. Addition of Tandem Belt

. Addition of Left Mirror

. Tail Lamp Lens Replacement

. Addition of Reflector

With the above minor operations, you can clear the vehicle inspection.

Custom List

FrontHandlebars, F forks, headlights, etc.

●A front fork extended by a bolt-on 15cm joint that can be assembled without disassembling the front fork body.

We have adjusted the tendency for heavier handling due to fork extension and rear lowering, so that you can enjoy and easily ride around town with tire selection.

【Front Fork】

“10cm Long Fork Joint” (For use without valve) ¥17,800

〇High-strength stainless steel long fork joint.

“Front Fork Dust Seal” ¥2,400

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is lengthened.

“Welding Side Stand Extension Plate” ¥3200

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Handle/Handle Area】

“Semi-Narrow Pullback Handle”¥12,000

〇A handle with a narrow width typical of a chopper, made to be less tiring.

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,180

“Trail Enduro Grip”¥1,300

“Throttle Wire 1000mm”¥2,750

“[Special long brake wire for SR drum brake] 400mm” ¥4,800

“300mm Long Clutch Cable”¥2,500

◯The handle area is a standard 2%ER clean treatment with a small throttle and simple grip.

[Clean Handlebar Setup]

“MOTOR ROCK Decompression lever” ¥4,500

〇 An engine-mounted decompression lever to simplify the handlebar area

[Switch]

“Mini Blinker & Dip Switch Coupler On Kit (’85 ~ 00)” ¥3,950

〇 A switch kit that significantly reduces the time-consuming harness work.

【Speedometer】

『Mechanical Speedometer 60mm Black Panel 1:4』¥8,400

〇A standard small meter. It comes with a trip function.

『Extension meter cable joint』＋Extension meter cable joint¥1,900 x 2

〇Used when extending the fork or relocating the meter.

【Front Fender】

“2%er Short Front Fender STD [SR400/500]” ¥12,500

〇A short fender that suits any style. It has a design with ribs around the perimeter like the original.

【Front Tire】

“SHINKO flute 3.00-18”¥12,800

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

【Headlight】

“5.75 inch Bates Light HS Type Chrome Rim/Black Body”¥10,500

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II” ¥2,400

〇A headlight stay that suits the chopper style well with its moderate height and protrusion.

【Front Blinker】

“Certified Star Beans Blinker/Black 2p”¥7,250

〇One of the world’s smallest size E-mark certified, ultra-small blinkers that are inspection OK.

“Stem Mount Blinker Stay A Type Steel Black 2P”¥2,400

〇A small quality stainless stay to mount a 10mm mounting blinker on the side of the stem

CenterTank, oil tank, seat, step, muffler etc.

●With the conversion to FCR carburetor and a good exhaust muffler, the ride has become much more enjoyable, and the mid-high position of the step makes it a position that is not easily tiring even over long distances.

【Muffler】

“Slip-On Trumpet Muffler”¥37,000

〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.

【Step】

“Drilled Mid-High Step Kit/Parkarize“　￥62500

〇A step kit that is indispensable for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Seat】

” Slim Double Seat Bates Type Vertical Roll for SR400/500” ¥38,000

〇The narrow seat that fits within the frame width is an original vertical type that focuses on comfort.

Thanks to the mid-high step, it’s a position that doesn’t tire you out even on long distances, despite the separate handlebars.

【Carburetor】

『FCR carburetor 39φ SR400/500 single unit』¥71,000

〇Your slow SR will be dramatically transformed. This is a carburetor that is easy to handle with sharp and smooth acceleration.

『SR400/500 FCR39φ Carburetor Mounting Adapter』¥12,000

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

『Funnel Net for FCR Carburetor』¥3,900

〇This is a stainless steel trash prevention net.

【Electrical Equipment】

“New Electrical Equipment Plate” (Coming Soon)

〇You can make the area under the seat of carburetor models up to 2008 completely empty.

“BT Type Custom Ignition Switch Bolt-On Kit” ¥6,500

〇A custom main key that can also be used on vehicles equipped with a battery.

“IC blinker relay wide range specification” ¥2,400

〇A wide-range turn signal relay that can be used without difficulty even with LED turn signals. It supports 1-150 watts and can also be used as a replacement for the original relay.

“Battery Lesser” ¥3,400

〇This is a battery-less kit that we manufacture in Japan.

【Engine Area】

『Breather filter SR400/500』¥3,500

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

『Front sprocket SR400/500 428-19』￥￥2,000

〇A durable replacement sprocket made of steel

RearFenders, rear shocks, swingarms, etc.

●The rear area was only modified with a lowered rear shock replacement, turn signals, tail lamp replacement, and the addition of a sissy bar. It was nicely finished with minimal effort.

【Rear Shock】

“280mm G-Suspension”¥28,875