Home » #315 SR400

#315 SR400

2024.7.29

Custom Bike

#315 SR400Custom Report

We received an order for a Chopper-style SR400 from Chiba Prefecture.

At the owner’s request, we mounted a narrow Sportster tank further forward than usual, a longer seat to fill the gap between the tank and the seat,

and a side cover with a built-in battery. These three items were custom-made, and all other parts were our original parts,

We created it in a balanced silhouette similar to the owner’s favorite “No. 274 SR400“.

The paint on the gas tank and side cover is “BACON“.

The sample is “No. 274 SR400”

■About Vehicle Inspection

. (Change of F turn signal position)

. Muffler replacement or core filling

. Addition of left and right mirrors

. Addition of tandem step and tandem belt (in case of registration for two people)

. Addition of reflector

You can clear the vehicle inspection with the above light work.

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

Custom List

FrontHandlebars, F forks, headlights, etc.

●Added a twist prevention cheek bar to the front fork, which is 32.5cm long in total with a long fork tube and joint.

The selection of small, rounded tires reduces the weight of the handle when using a long fork.

The headlight that can store many harnesses and the new handlebar controls are a standard clean finish.

【Front Fork Area】

“175mm Long Fork Joint” ¥20,460 tax included

〇High-strength stainless steel long fork joint.

“SR400/500 15cm long inner tube kit” ¥68,200 tax included

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]” ¥19,250 tax included

〇A stabilizer that is extremely effective in correcting the handling that tends to lag one tempo behind the extended fork.

“Front Fork Dust Seal” ¥2,640 tax included

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is extended.

“Welding Side Stand Extension Plate” ¥3,520 tax included

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Front Wheel】

“SHINKO flute 3.00-18” ¥14,080 tax included

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

“2%er Front Wheel Aluminum Hub Cap [SR400/500]”

〇You can change to a classical style by sticking it on a normal drum brake.

【Handle/Surroundings】

“Riserless Narrow Pullback Handle” ¥27,000-

〇A chopper handle of the direct attachment type to the top bridge.

“Barrel Grip”¥1,650 tax included

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,598 tax included

“1000Amal type slot wire 900mm ’88~’08” ¥3,025 tax included

“600mm Long Brake Cable” ¥5,280 tax included

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥4,345 tax included

〇Easy to install mini turn signal switch with coupler on

“Handle Lock Weld On Kit” ¥4,620 (tax included)

● A new handle lock has been installed under the stem, making it less noticeable and easier to operate.

“MOTOR ROCK Decompression lever” ¥4,950 (tax included)

● A decompression lever directly attached to the engine to simplify the area around the handle.

【Headlight】

“5.75 inch Bates Light HS Type Chrome”

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II” ¥2,640 tax included

〇A headlight stay that suits the chopper style well with its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Front Blinker】

“Certified Star Beans Blinker/Black 2p”

〇World’s smallest size E-mark certified, ultra-small blinker that is inspection OK

“Stem Mount Blinker Stay A Type Steel Black 2P” ¥2,400 (excluding tax)

〇A small quality stainless stay to mount a 10mm mounting blinker on the side of the stem

【Speedometer】

【Small Tank Left Side Meter Kit】¥16,390 including tax

〇A kit that allows you to bolt on a 60φ meter to a less noticeable location with good visibility when converting to a small tank such as a sports tank.

『Extension meter cable joint』¥2,090 including tax

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

● The gas tank, a one-off production mounted at the owner’s preferred location (the Narrow Sportster Tank Bolt-on Kit will be released in early 2025),

The seat that fills the unnatural gap is also a one-off.

With the FCR carburetor that makes riding extremely fun, and the tireless step, this is a custom that allows you to ride comfortably and enjoyably.

【Step/Shift】

“Mid-High Jockey Shift Kit/Parkarize”

〇A jockey shift kit that maintains the comfortable riding posture of the mid-high step, with attention to touch and stroke operation.

【Muffler】

“Torque cone drag pipe muffler SR400/500” ¥39,600 tax included

〇This is a full exhaust muffler with a torque cone that we developed in-house in the mouthpiece. It is made at an angle that suits any style, such as a normal frame or hardtail.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit” ¥78,100 tax included

〇Your slow SR will be dramatically transformed. This is a user-friendly carburetor that provides sharp and smooth acceleration.

“Net funnel set for FCR carburetor” ¥11,990 tax included

〇This is a set of an aluminum funnel, which is a change from the red plastic funnel, and a stainless steel trash prevention net.

“Manifold Kit for FCR39φ” ¥13,200 tax included

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

【Electrical Equipment】

“SR400/500 Custom Electrical Plate #2%er Original #SR400/500” ¥4,620 tax included

〇All electrical components except the CDI are consolidated at the rear of the engine crankcase.

“BT Type Custom Ignition Switch Bolt-On Kit” ¥7,150 tax included

〇A custom main key that can also be used in vehicles equipped with a battery.

“One-Off Side Cover”

〇In order to create a cohesive overall atmosphere, we have custom-made a side cover.

【Gasoline Tank】

“Narrow Sportster Tank”

〇It is mounted more towards the front than usual. (The Narrow Sportster Tank Bolt-On Kit will be released at the beginning of 2025)

【Seat】

“Cobra Seat”

A custom-made double seat that is slightly longer to fit the tank mounting position.

【Engine Area】

“Breather filter SR400/500” ¥3,850 tax included

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19” ¥2,200 tax included

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●The rear area has been enhanced with a B-grade feel by leaving the SR-like genuine fender as it is, lowering the car, changing the tail lamp, and adding a sissy bar.

This vehicle has been converted to 16 inches, the rim has been finished in black with powder coating, selected tires that lower the vehicle height, and the overall silhouette has been adjusted.

【Sissy Bar】

“SR400/500 FORK Sissy Bar Bolt-On Kit” ¥57,200 including tax