FrontHandlebars, F forks, headlights, etc.

【Front Wheel】

“Front 19-inch Kit for SR400/500 Disc Brake”

◯With the “Front 19-inch Kit”, you can achieve a classic look even with disc brakes.

---

【Front Fork】

“Fork boots, general-purpose”

〇A classical universal fork boots. The unnecessary stay of the bottom case has been smoothed and pearlite treated.

---

【Headlight】

“Unity Replica Headlight”

◯ A cool headlight with a crest and lens cut.

---

【Handle/Handle Area】

◯The drag bar handle is lifted with a vintage Flanders dog bone riser.

“Narrow Drag Bar Handle”

〇A narrow flat handle with a short clamp section.

“Top Bridge for Bar Handle”

◯A top bridge that can clamp the handle 2cm lower than the original.

“Amal type throttle holder, general purpose (for 7/8″)”

◯Controls such as switches are simplified using small ones. It’s a standard menu of 2%ER.

“Amal type slot wire 1200mm ’88~’08”

“Clutch Wire 200mm Long”

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

---

“Handle Lock Weld On Kit”

〇It is bolted on to the less noticeable and easy-to-operate lower part of the stem.

---

“MOTOR ROCK Decompression lever”

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

---

【Front Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose”

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay”

〇A stay to attach a 10mm blinker to the frame bottom.

---

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4”

“Universal Speedometer Stay”

〇Mounted on the less noticeable and highly visible left front side of the gasoline tank.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off Pipe Manufacturing Exhaust Pipe Flange Set”

〇Use a convenient manufacturing kit for the root mouthpiece and create a one-off. The handling of the exhaust pipe is according to the owner’s preference. The silencer uses a racing megaphone with a punching mesh at the end.

---

【Step】

“Mid-High Control Parkerized for SR400/500”

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

---

【Seat】

◯The seat is a one-off Bates type. Despite being rigid, the angle of the seat attachment and the springs make it surprisingly comfortable to ride.

“Welding nut non-through M8 2p”

〇Used on the frame side as a seat spring receiver.

---

【Electrical】

◯ An electrical box made by modifying a BSA oil tank under the seat. All the electrical components of the high model year are consolidated in this box.

“IC blinker relay wide range specification”

〇 A wide-range turn signal relay that can handle 1-150 watts without any problem even with LED turn signals. It can also be used as a repro for the original relay.

“Battery Lesser”

〇 This is a battery-less kit that we manufacture in Japan.

---

【Gasoline Tank Installation】

◯ A peanut tank that has been slightly narrowed, using a gas cap for Triumph. This is a gas tank made in the style of the old WASSEL.

“Welding nut non-through M8 2p”

〇 Drill a hole in the gasoline tank body and weld it in. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p”

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p”

〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

---

【Engine Area】

“Breather filter SR400/500”

〇This is a filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19”

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Hardtail】

『“Rigid Line” Bolt-On Hardtail Kit』(5cm Long)

〇As the name suggests, it’s a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to a rigid line. You can revert to a swing arm/rear shock specification during vehicle inspection or when changing styles.

---

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear”

〇This is a kit that gives a powerful look with the same size as a typical Harley. A, N, S rear tires.

“Drilled plate torque rod SR400/500”

〇This is a drilled design torque rod to avoid interference with the wider tires.

---

【Rear Fender】

“5-Inch Custom Rib Fender – Steel Material”

◯A durable rib fender with thickness. Mounted with a flat stay. Despite its simplicity, it is finished with a good atmosphere by using a minus bolt.

“Reinforcement Back Plate for 5-Inch Rib Fender”

〇We have added a reinforcement plate around the mounting hole to make it even more robust.

“Classical Minus Bolt Set – 6-Piece Set (Metric Standard)”

◯We used a minus screw for the mounting bolt and made it with a vintage atmosphere.

---

【Tail Lamp】

◯A replica tail lamp from the English Mirror Company for the side number. It is a replica of the tail lamp that was used in British bikes such as Triumph.

---

【Rear Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose”

〇A classic among classics. A chopper-style blinker.

“Weld tab S size 4.5mm thick steel 2p”

〇Welded onto the hardtail. Used as a blinker base.

---

【Drive System】

“Rear sprocket SR400/500 428-56”

〇An affordable and durable replacement sprocket.