Home » #321 SR400

#321 SR400

2024.10.14

Custom Bike

#321 SR400Custom Report

This is a chopper-style SR400 made entirely with our original parts, including the new sports starter tank kit and riser-less pull-back handle.

It was created as a custom that makes vehicle inspection easy with a combination of bolt-on parts without frame modification.

. Handling that significantly reduces the weight when converting to a long fork with a 2° rake triple tree and a small, rounded front tire selection,

. Mid-high step that allows weight distribution

. FCR carburetor that makes the SR fun across the entire range

It is a chopper style that is durable, hard to crush, less tiring, and fun to ride.

The paint of the sports starter tank with a faint pattern and the aging of the entire body is handled by ‘BACON‘.

■Vehicle Inspection

. Muffler replacement or core stuffing

. Change front indicator position (insufficient width)

. Add left mirror

. Replace tail lamp

. Add reflector around the tail lamp

. Install tandem belt

. Install tandem step

That’s all.

◎’Other 2%ER frame modification-free custom SR400/500 here‘

Custom List

FrontHandlebars, F forks, headlights, etc.

●The front area features a 30cm long front fork laid down with a 2° rake triple, and the selection of small-diameter tires not only gives it a chopper-like look but also significantly alleviates the heaviness of handling when the fork is extended. It is a combination with a new riser-less pullback handle.

【Front Fork Area】

『10cm Long Fork Joint』￥17,800

〇High-quality stainless steel fork joint.

『20cm Long Inner Tube』￥68,200

〇Fork tube kit that allows you to extend the front more safely.

『2%er Tweak Bar (front stabilizer) [SR 400/500]』￥17,500

〇A stabilizer that is extremely effective in correcting the handling that tends to lag when the fork is extended.

『Front Fork Dust Seal』￥2,400

〇A very simple dust seal. It can also be used as a replacement for the stock fork boots that become unusable when the fork is extended.

『Welding Side Stand Extension Plate』￥3,200

〇A plate to extend the side stand that becomes too inclined when the fork is extended. Welding is required.

【Front Fender】

『2%er Short Front Fender STD [SR400/500]』￥12,500

〇A short fender that suits any style. Although made of FRP, it has a design with ribs around the outer circumference like the original.

【Front Wheel】

『SHINKO flute 3.00-18』￥12,800

〇Street tire with a vertical groove design. It lightly corrects the handling that tends to become heavy when the fork is extended. It is a small diameter, rounded 3.00 size.

【Handle/Surroundings】

『Riser-less Narrow Pullback Handle』￥27000-

〇Chopper handle type that is directly attached to the top bridge.

『2° Triple Tree Handle Post Spacer』 (Mid-2024 release)

〇Solid mount with a 30mm long spacer for 2° tree. Can be used either up or down.

『Cork Bottle Classical Grip』￥1,500

『Amal type throttle holder, general purpose (for 7/8″)』￥4,180

Amal type slot wire 1000mm ’88~’08￥2,750

『600mm Long Brake Cable』￥4,800

『300mm Long Clutch Cable』￥2,000

『Chrome Cross Mirror』￥5,400

〇Iron cross design, chopper-like design clamp mirror.

【Switch】

『Mini Blinker Switch Coupler On Kit (‘85～00)』￥3,950

〇Mini blinker switch that is easy to install with a coupler on.

『Handle Lock Weld On Kit』￥4,200

〇A handle lock is newly installed under the stem, which is inconspicuous and easy to operate.

『MOTOR ROCK Decompression lever』￥4,500

〇An engine-mounted decompression lever that simplifies the handle area.

【Headlight】

『5.75 Inch Bates Light HS Type Chrome』￥10,500

〇A Bates light with a custom vehicle-specific harness storage type that can store many harnesses and couplers inside the light.

『Bottom Mount Light Stay II』￥2,400

〇A headlight stay that suits the chopper style well with a moderate height and protrusion amount. (5.75 inch Bates Light Set II SR400/SR500）

【Front Blinker】

『Certified Star Beans Blinker/Black 2p』￥7,250

〇One of the world’s smallest size E-mark certified, ultra-compact blinkers that are inspection OK.

『Universal Blinker Stay 10A Type Black』￥2,200

〇A mounting stay compatible with our Star Beans Blinker and other “A Type Blinkers”. The mounting side hole diameter is 10mm (3/8 inch).

※This vehicle is mounted on the front side of the lower engine mount.

【Speedometer】

【Small Tank Left Side Meter Kit】￥14,900

〇A kit that allows you to mount a 60φ meter in a highly visible and inconspicuous location when replacing with a small tank such as a sports tank, completely bolt-on.

『Extension meter cable joint』￥1,900

〇Used when extending the fork or relocating the meter.

“`

CenterTank, oil tank, seat, step, muffler etc.

●Steps that allow the knees to bend moderately and distribute weight, a highly cushioned seat, and an FCR carburetor that dramatically changes the SR’s performance, enhancing comfort and the joy of riding around the center. A sports star tank with a natural mount position that suits the normal frame and a classic drag pipe muffler are selected.

【Gasoline Tank】

“Sports Star Tank Bolt-On Kit Steel Base SR400/500 for Carburetor Model All Years”￥80,000

〇A bolt-on sports star tank designed by 2%ER to fit the SR in the best position with almost invisible mounting stays.

【Step】

“Mid-High Control Parkerized for SR400/500“￥64,500

〇A step kit essential for 2%ER custom, providing a cool riding posture and a position that is extremely fatigue-resistant.

【Muffler】

“Torque cone drag pipe muffler SR400/500“￥36,000

〇A full exhaust muffler with a uniquely developed torque cone embedded in the mouthpiece. It is made at an angle that suits any style, including normal frames and hardtails.

【Seat】

“Old school bucket double seat SR400/500“￥45,500

◯The thickest and most comfortable seat among 2%ER originals, holding around the hip bones.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit“￥71,000

〇Transforms a slow SR dramatically. A carburetor with sharp and smooth acceleration that is easy to handle.

“Funnel Net for FCR Carburetor”￥3,900

〇A set of stainless steel dust protection nets to be sandwiched between the body and the funnel.

“Manifold Kit for FCR39φ”￥12,000

〇A dedicated adapter to securely fix the FCR carburetor to the SR400/500.

【Electrical】

“2%ER New Electrical Plate” (Coming Soon) Price TBD

“BT Type Custom Ignition Switch Bolt-On Kit”￥6,500

〇A custom main key that can be used on vehicles with a battery.

【Engine Area】

“Breather filter SR400/500“￥3,500

〇A filter kit necessary when removing the stock air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“￥2,000

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●A popular combination of a 16-inch kit that balances cushioning and looks with a rear low-down. The sissy bar, which can hold a lot of luggage from shopping in the city to camping gear, is also a point.

【Rear Shock】

『280mm G-Suspension/Chrome』￥28,875