FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“Fork boots, general-purpose“

〇Classic universal fork boots.

【Front Fender】

“2%er Short Front Fender STD [SR400/500]“

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.

“SR400/500 Front fender upper stay“

〇A plate to lift and attach the fender when using tires with height.

【Front Tire】

『LOADSTAR TIRE 4.00-18』

〇A classic watermelon pattern, a vintage style tire with height.

【Headlight】

“5.75 inch Bates Light Black General Purpose“

“SR Bottom Mount Light Stay“

〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.

【Handle/Handle Area】

“Street Low Handle Black“

◯Selected a black body handle that is hard to find good ones.

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1000mm ’88~’08“

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

〇Using each long cable with a simple throttle.

【Front Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the frame bottom.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

◯The muffler is a one-off item, shortened and modified from a WM-made JMC-certified stainless megaphone, considering the owner’s profession.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Seat】

“Slim Double Sheet Bates Type Tuck Roll for SR400/500“

You have chosen a slim and simple tuck roll seat, which can be selected from 7 types.

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can handle 1-150 watts without any difficulty, even for LED turn signals. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit that we manufacture in Japan.

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

● A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

『280mm Low Down Suspension】G-SUSPENSION280【Black】General-purpose』

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

【Rear Fender】

『2%er Rear STD Short Fender [SR400/500]』

〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.

【Rear Tire】

“LOADSTAR TIRE 4.50-18“

〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.

【Tail Lamp】

“Sparto Tail Lamp/Black”

〇A classic simple Sparto tail lamp. It is in black.

【Rear Blinker】

“Small Bullet Blinker/Black”

〇A classic among classics. A chopper-style blinker.

“Rear Bottom Mount Blinker Stay”

〇A stay to attach the blinker to the swing arm.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.