Home » #58 SR400

#58 SR400

2015.1.27

Custom Bike

#58 SR400Custom Report

“Original Parts” were extensively used in the SR400 Chop Cafe.

Chopper/Bobber × Cafe Racer. This style is also a specialty of 2%ER.

The framework and legs follow the manners of a street bobber, with the drop processing of the seat rail and

“Firestone Tires”, “Lowered Rear Shock” and other classic silhouettes.

Thanks to the General Purpose Rib Sheet Cowl FRP 2%er Original that became a weight stopper on the lowered frame,

Even with the “Separate Handle”, you can comfortably ride long distances without your hands getting numb.

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork】

◯The front fork is buffed after cutting/smoothing unnecessary stays from the bottom case.

【Front Tire】

『LOADSTAR TIRE 4.00-18』

〇A classic watermelon pattern, high vintage style tire.

【Headlight】

“7 inch Lucas type headlight case chrome“

◯The Lucas type headlight is packed tightly into the back by sheet metal. It was simply mounted with a one-off stainless light stay. (　Click here for headlight related parts　)

【Handle/Handle Area】

“CHUCK BOX Ace Bar Handle”

〇Extremely thick stainless steel, extremely simple handmade separate handle.

“2%er Top Bridge Ⅰ for separate handle [SR400/500]“

〇Classic style top bridge without holes for bar handle. Unnecessary stays are smoothed. Finished simply.

“Amal type throttle holder, general purpose (for 7/8″)“

〇A very simple classic vintage style throttle.

“Amal type slot wire 800mm ’88~’08“

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

【Switch】

“Mini Turn Signal Switch Coupler-On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler-on

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Front Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the bottom of the frame.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Fishtail End Tip“

◯The semi-up fishtail muffler is a one-off item tailored to the style.

【Seat】

◯A one-off single bucket seat. The seat rail is drop-processed. It creates a low style and has the same effect as raising the handle.

“General Purpose Rib Sheet Cowl FRP 2%er Original“

◯A stopper for the upper body weight. By holding it around the top of the tailbone, you can ride more comfortably than you think. It is designed to avoid contact even when the suspension is at full stroke.

【Gasoline Tank Installation】

◯ The slim Sportster is a one-off. It’s finished with a speedy scallop paint job.

“Welding nut non-through M8 2p“

〇 Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“