Follow 2%er
Home » #325 SR400

#325 SR400

Custom Bike

#325 SR400Custom Report

This is a 2006 model SR400 custom with an immobilizer, ordered from Mie Prefecture and produced by us.

True to 2%ER style, it offers a comfortable and enjoyable ride without fatigue, can be easily produced with all bolt-on parts, and features a B-grade chopper style that makes inspections easy.

It is finished with a well-balanced overall look using a combination of our original parts.

The front and rear wheels are made by the now-defunct Y’S GEAR. Unlike the old cast type, the front is 18 inches. The lightweight and narrow tires allow for a significant reduction in handlebar weight even when converted to a long fork.

The chrome-plated old-style narrow tank is also a discontinued Y’S GEAR product.

■ Vehicle Inspection

. Muffler replacement

. Addition of left mirror

. Addition of reflector around the tail lamp

. Addition of tandem belt and tandem step (for two-seater registration)

These light tasks (work time at 2%ER: about 20 minutes) can clear the inspection (initial dimension change submission required).

◎『Other 2%ER custom SR400/500 without frame modification here』

   

   

Custom List

FrontHandlebars, F forks, headlights, etc.

●The front fork extended by a total of 35cm with the inner tube and joint. Even with this length, the handling weight is greatly reduced with the small-diameter tire on the front 18 inches.

Headlight that can store many hub caps, harnesses, and couplers compatible with wheels from the ’01 model year onwards, and all parts around the handle/handle are bolt-on.

【Around the Front Fork】

『20cm Long Inner Tube』￥62,000

〇Fork tube kit that allows you to extend the front more safely.

『2%er 15cm long Joints for Front Fork (pair) [SR400/500]』￥17,800

〇High-quality stainless steel fork joint.

『2%er Tweak Bar (front stabilizer) [SR 400/500]』￥17,500

〇A stabilizer that is extremely effective in correcting the handling that tends to lag with extended forks.

『Welding Side Stand Extension Plate』￥3,200

〇A plate for extending the side stand that tilts too much when the fork is extended. Welding is required.

【Front Wheel】

「Front Disc Hub Caps Starburst」￥6,300

〇Starburst design hub cap that fits on the right side of the disc hub.

『Front Disc Rotor TRAD type1 `01～』￥22,000

〇Classical design by Sunstar, old model type disc rotor.

【Front Tire】

『SHINKO flute 3.00-18』￥12,800

〇Street tire with vertical groove design. Lightly corrects handling that tends to become heavy when converting to long forks. It is a small diameter and rounded 3.00 size.

【Headlight】

『5.75 Inch Bates Light HS Type Chrome』￥10,500

〇Bates light with a harness storage type for custom vehicles that can store many harnesses and couplers inside the light.

『Bottom Mount Light Stay II』￥2,400

〇Headlight stay that fits well with chopper style with moderate height and protrusion amount. (5.75 inch Bates Light Set II SR400/SR500）

【Handle/Handle Area】

『Semi Narrow Pullback Handle』￥12,000

〇Narrow handle with a chopper-like width made to be less tiring.

『PAUGHCO type 3inch Square Riser SR400/500』￥27,800

〇Handle post with a very usable height, maintaining the atmosphere of the time.

『Chopper Grip』￥1,500

〇Simple and easy-to-grip standard grip.

『Amal type throttle holder, general purpose (for 7/8″)』￥4,180

(This vehicle uses a vintage Tomaselli, chain-pull throttle)

 Amal type slot wire 1100mm ’88~’08￥2,750

『Brake Hose 1300mm Custom Made』

『MOTOR ROCK Decompression lever』￥4,500

〇Engine direct decompression lever to simplify the handle area.

【Meter】

『Mechanical Speedometer 60mm Black Panel 1:4』￥8,400

〇Classic small meter. Comes with a trip.

「Inside meter stay SR400/500」￥3,800

◯Installed on the left side of the stem for less visibility and better visibility.

『Meter Cable Extension Joint 30cm』￥1,900

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』￥7,000

〇The classic of classics. Chopper style turn signal.

『SR400/500 Bottom Mount narrow blinker stay』￥5,800

〇Stay for mounting M10mm turn signals to the frame bottom.

CenterTank, oil tank, seat, step, muffler etc.

● The riding position is determined by the three points of the handle, step, and seat. The seat is highly cushioned among thin types, and the step is selected as a mid-high step that can distribute the weight of the lower body, allowing for a comfortable ride without fatigue.

With the selection of the FCR carburetor, the ride changes dramatically, and you can enjoy riding with significantly increased power and acceleration across the entire range.

【Step/Shift】

『Mid-High Step Kit/Chrome』 ￥71,500-

〇 A step kit essential for 2%ER custom, which provides a cool riding posture and a position that is extremely fatigue-resistant.

【Muffler】

『Torque Cone Long Drag Pipe Muffler Tail Up』￥39,000

〇 A long version of the classic drag pipe muffler. It is a muffler with the best line that suits both normal frames and hardtail frames.

【Seat】

「Slim Double Seat/Vertical Roll」￥38,000

〇 A narrow seat that fits within the frame width, with an original vertical type that focuses on comfort.

Thanks to the mid-high step, it provides a position that is less tiring even for long distances, despite the separate handle.

【Carburetor】

『FCR Carburetor』￥79,000

〇 The slow SR changes dramatically. It is a user-friendly carburetor with sharp and smooth acceleration.

『Funnel Net for FCR Carburetor』￥3,900

〇 A set of stainless steel dust protection nets that are sandwiched between the body and the funnel.

『Manifold Kit for FCR39φ』￥12,000

〇 A dedicated adapter that firmly fixes the FCR carburetor to the SR400/500.

【Electrical】

『SR400/500 Under-Seat Electrical Plate』￥8,600

〇 2%ER original, an under-seat electrical plate for SR400/500 that can accommodate a battery.

It can make the under-seat area of carburetor models up to the 2008 model year spacious.

『IC Blinker Relay』￥2,400

〇 A wide-range blinker relay that supports 1 to 150 watts, easily usable with LED blinkers. It can also be used as a repro for the genuine relay.

『Battery Lesser』￥3,400

〇 A battery-less kit made entirely in Japan.

【Engine Area】

『AIS Cancel Plate』￥1,500

〇 A stainless steel cancel plate. It can also be used by sandwiching it without removing the AIS body.

『Breather Filter』￥3,500

〇 A filter kit necessary when removing the genuine air cleaner.

【Drive System】

『Front Sprocket 428-19』￥2,000

〇 A replacement sprocket made of steel with high durability.

    • RearFenders, rear shocks, swingarms, etc.

    ●Replaced the rear shock, tail lamp, and turn signals, and added a sissy bar.

    Finished with a good atmosphere using minimal parts.

    【Rear Shock】

    ‘280mm G-Suspension/Chrome’ ￥28,875

    〇Rear shock lowered by about 4cm. Moves well among low-down suspensions. (Requires removal of the stock chain case)

    【Sissy Bar】

    ‘SR400/500 Sissy Bar (Sissy Bar) Plate Hole Type‘ ￥19,000

    〇A plate to attach a sissy bar while hiding the unsightly seat rail of the SR.

    (The bar part is processed and installed from customer-supplied items)

    【Tail Lamp】

    ‘Lucas tail lamp with pedestal Japanese standard number size‘ ￥8600

    ◯A tail lamp with a good atmosphere imported body but easy to use with Japanese standard number size. Requires drilling on the rear fender.

    ‘License Plate Reinforcement Aluminum Back Plate‘ ￥1,500

    〇2mm thick aluminum plate for preventing cracks in the license plate or reinforcing already cracking numbers.

    【Rear Tire】

    ‘LOADSTAR TIRE 4.50-18‘ ￥14,500

    〇Classic vintage style watermelon pattern. A rear tire with height and volume.

    【Rear Turn Signal】

    ‘Small Bullet Turn Signal Chrome 4pcs SET General Purpose‘ ￥7,000

    〇A classic among classics. Chopper style turn signal

    【Drive System】

    ‘Rear sprocket SR400/500 428-56‘ ￥4,800

    〇Steel sprocket with high durability.

    ‘O-ring chain 428-130L‘ ￥11,603

    〇Replacement drive chain with built-in O-ring.

    ※Parts Reference may show similar products or products with additional processing.