#319 SR400Custom Report

# SR400 Custom Report

An SR400 made entirely with bolt-on parts, without any frame modifications. It’s a custom design inspired by the standard style of British bikes like Triumph, featuring block-like front and rear tires, a left-out up-muffler, and the image of a street custom/scrambler that seems to have been running on unpaved roads at the time.

 


◎”Check out other 2%ER’s custom SR400/500 without frame modifications here

   

  

Custom List

FrontHandlebars, F forks, headlights, etc.

●The front area replicates a street custom style from the 60’s with an upright handlebar without extending the fork of that time. The fender has been changed to a STD short fender that suits any style.


Headlight

5.75 inch Old Bates Type Side Mount Headlight #5.75 inch headlight #General-purpose parts” ¥8,640

〇Vintage style side mount headlight. H4

Old Bates Type Side Mount Light Stay SR400/500, XS650 #5.75 inch headlight #2%er Original #SR400/500 #XS650” ¥5,500

〇Headlight stay molded from vintage


Handle/Handle Area

Upriser Bar Handle” ¥10,000

◯A handle that focuses on ease of riding in the 60’s style.

Amal type throttle holder, general purpose (for 7/8″)” ¥4,180

“Trail Enduro Grip” ¥1,300

Amal type slot wire 1000mm ’88~’08 ¥2,750

“200mm Long Brake Cable” ¥2,000

200mm Long Clutch Cable” ¥2,000


Switch

“Mini Turn Signal Switch Coupler On Kit (’85~00)”¥3,950

〇Easy to install mini turn signal switch with coupler on

(For different model years, it is installed with modifications to small headlights)


Handle Lock Weld On Kit” ¥4,200

〇It is newly installed by welding at the lower part of the stem, which is inconspicuous and easy to operate.


MOTOR ROCK Decompression lever” ¥4,500

〇A decompression lever directly attached to the engine to simplify the handle area.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4” ¥8,400

〇A classic small meter. Comes with a trip function.


Front Blinker

“Small Bullet Blinker/Chrome”¥7,000

〇A classic small bullet blinker, black. It is a 10mm mount.

SR400/500 Bottom Mount narrow blinker stay“¥5,800

〇A stay to mount a 10mm blinker to the bottom of the frame.


Front Wheel

2%er Short Front Fender STD [SR400/500]” ¥12,500

〇A short fender that suits any style. It is made of FRP but has a design with ribs around the perimeter like the original.

SR400/500 Front fender upper stay” ¥3,500

〇A plate to lift and attach the fender when using a tire with height (height).

“Pirelli MT53 Replica 4.00-18” ¥15,600

〇A replica of the 70’s Pirelli. It suits all styles from street to tracker, scrambler, bobber, chopper, etc.

Fork boots, general-purpose” ¥2,800

〇Classic universal fork boots.


CenterTank, oil tank, seat, step, muffler etc.

● The vehicle body and exterior finished with the bare minimum bolt-on parts.


“Drilled Mid High Step Kit / Parkerize” ¥62,500

〇A cool riding posture, a position that is extremely less tiring, this new product of drilled design step kit is indispensable for 2%ER’s custom.


Muffler

Left Up Trumpet Muffler Set SR400/500” ¥64,000

〇A full exhaust muffler equipped with a torque cone that we developed independently in the mouthpiece.

“Muffler Bandage Black” ¥2,200

〇Heat-resistant bandage to prevent burns.


Seat

“Bates TT Type Seat”¥41,000

〇A vintage BATES seat replica that also focuses on comfort.


Electrical Equipment

“2%ER New Electrical Plate” (Coming Soon) Price Undecided

 “IC blinker relay wide range specification” ¥2,400

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

Battery Lesser” ¥3,400

〇This is a battery-less kit that is made entirely in Japan.


FCR carburetor 39φ SR400/500 single unit” ¥77,000

〇Your slow SR will be dramatically transformed. This is a carburetor that is easy to handle with sharp and smooth acceleration.

“Funnel Net for FCR Carburetor” ¥3,900

〇This is a set of stainless steel trash prevention nets that are sandwiched between the body and the funnel.

“Manifold Kit for FCR39φ” ¥12,000

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.


Engine Area

“AIS Cancel Plate” ¥1,500

〇A cancel plate made of stainless steel. It can also be used by inserting it without removing the AIS body.

Breather filter SR400/500” ¥3,500

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19” ¥2000

〇A durable replacement sprocket made of steel


  • RearFenders, rear shocks, swingarms, etc.

    ● The rear area, which exudes a sense of lightness, uses classic parts such as rear fenders, tires, and sissy bars.


    Rear Shock

    “280mm G-Suspension/Chrome” ¥28,875

    〇Rear shock with about 4cm down. It moves well among the low-down suspensions. (Removal of the original chain case is necessary)


    SR400/500 Round Sissy Bar (Sissy Bar) Bolt-On Kit” ¥36,000

    〇A design often seen on old school choppers, well-balanced and recreated to suit the SR400/500’s vehicle size.


    Rear Fender

    2%er Rear STD Short Fender [SR400/500]” ¥15,000

    〇A short fender with ribs around the perimeter like the original, which suits all kinds of designs without any problems.


    Tail Lamp

    “Sparto Tail Lamp/Black”¥12,400

    〇A classic simple Sparto tail lamp. It comes in black.


    Rear Tire

    “Pirelli MT53 Replica 4.00-18”¥15,600

    〇A replica of the 70s Pirelli. It suits all styles, from street to tracker, scrambler, bobber, chopper, and more.


    Rear Turn Signal

    Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,000

    〇A classic among classics. A chopper-style turn signal.

    “Rear Bottom Mount Turn Signal Stay” ¥4,500

    〇A stay to attach the turn signal to the swing arm.


    Rear sprocket SR400/500 428-56” ¥4,800

    〇A durable sprocket made of steel.


    O-ring chain 428-130L” ¥11,603

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.