#312 SR400Custom Report

A standard long fork style SR400, assembled entirely with bolt-on parts.

Using original bolt-on design parts, crafted from our experience of producing numerous fully customized SRs,

We’ve created a cool look with a well-balanced overall design that remains orthodox,

Finished in a reasonable price range compared to fully customized vehicles from the frame,

A seat with good cushioning,

We’ve put a lot of care into the operability and other details in its production.

The chopper style is a major point, as it can significantly ease the vehicle inspection process compared to vehicles with modified frames.


Vehicle Inspection

.Addition of left and right mirrors

.Muffler replaced with original or core filled

.Addition of tandem step/tandem belt

.Addition of reflector around the tail lamp

.Change of front blinker position (often not pointed out)

That’s all.


◎『Check out other 2%ER’s custom SR400/500 without frame modifications here

Custom List

FrontHandlebars, F forks, headlights, etc.

● A bolt-on 15cm joint that allows the front fork to be extended without disassembling the main body of the front fork.

By selecting the right tires, we have adjusted the handling, which tends to become heavy due to the extension of the fork and the lowering of the rear, so that you can enjoy and easily ride even in city driving.

While using the standard headlights and turn signals, they are installed in a position where they can be cleared as they are during vehicle inspection, without any position changes.


Front Fork

Front Fork 17.5cm joint pair for SR400/5002%er 15cm long Joints for Front Fork (pair) [SR400/500]

〇High-strength stainless steel long fork joint.

Fork boots, general-purpose” ¥2,800 (excluding tax)

〇Classic universal fork boots.

“Welding Side Stand Extension Plate” ¥3,200 (excluding tax)

〇A plate to extend the side stand that leans too much when the fork is extended. Welding is required.


Handle/Handle Area

“Narrow Pullback Handle” ¥11,000 (excluding tax)

〇A pullback handle that is 10cm narrower than the popular semi-narrow pullback.

Amal type throttle holder, general purpose (for 7/8″)” ¥3,800 (excluding tax)

“Barrel Grip” ¥1,300 (excluding tax)

“900mm Throttle Cable” ¥2,500 (excluding tax)

“Brake Hose 1000mm 0°-35” ¥6,000Amal type slot wire 1100mm ’88~’08

200mm Long Clutch Wire” ¥2,000 (excluding tax)

◯The handle area is neatly arranged with a small throttle and simple grip, a standard of 2%ER.


[Neat Handlebar Arrangement]

MOTOR ROCK Decompression lever” ¥4,500 (excluding tax)

〇A decompression lever directly attached to the engine to simplify the handlebar area

Switch

“Mini Blinker & Dip Switch Coupler On Kit (`85 ~ 00) ¥5260 (excluding tax)

〇A switch kit that significantly reduces the time-consuming harness work.

Handle Lock Weld On Kit” ¥4,200 (excluding tax)

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4” ¥8,400 (excluding tax)

〇A classic compact meter. Comes with a trip meter.


Front Tire

“SHINKO flute 3.00-18” ¥12800 (excluding tax)

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.


Headlight

“5.75 inch Bates Light HS Type Black Body/Chrome Rim Universal” ¥10,500 (excluding tax)

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

Bottom Mount Light Stay II” ¥2,400 (excluding tax)

〇A headlight stay that suits the chopper style well with its moderate height and protrusion.


Front Blinker

Star Bean Blinkers, Set of 2, Chrome

〇World’s smallest size E-mark certified, inspection OK ultra-small blinker.

“Stem Mount Blinker Stay A Type Steel Black 2P” ¥2,400 (excluding tax)

〇Small quality stainless stay to mount a blinker with a mounting hole of 10mm on the side of the stem.


CenterTank, oil tank, seat, step, muffler etc.

● The vehicle body and exterior are finished with the bare minimum bolt-on parts.

The original gasoline tank painted in black, the classic drag pipe muffler, and a comfortable seat with an old-school design are used.


Muffler

Torque cone drag pipe muffler SR400/500』¥36,000 (excluding tax)

〇This is a full exhaust muffler with a torque cone that we developed in-house incorporated into the mouthpiece.


Seat

“Old School Double Seat” ¥41,000 (excluding tax)

〇This is a standard seat for 2%ER’s normal frame custom, featuring a button-down design that is difficult to express in mass-produced products, and a thick urethane design that still looks stylish.


Electrical Equipment

Brat Style Electrical Plate

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

 “IC blinker relay wide range specification” ¥2,400 (excluding tax)

〇A wide-range blinker relay that can be used without difficulty even with LED blinkers, compatible with 1-150 watts. It can also be used as a replacement for the original relay.

Battery Lesser” ¥3,400 (excluding tax)

〇This is a battery-less kit that we manufacture in Japan.


Engine Area

“AIS Cancel Plate”

〇A stainless steel cancel plate. It can also be used by inserting it without removing the AIS body.

Breather filter SR400/500” ¥3,500 (excluding tax)

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19” ¥2000 (excluding tax)

〇A durable replacement sprocket made of steel


  • RearFenders, rear shocks, swingarms, etc.

    ●Lowered with a 280mm suspension and fitted with the classic watermelon pattern tires around the rear.

    Selected the ANGEL WING sissy bar for the new round plate type.


    Sissy Bar

    “WING Round Sissy Bar (Sissy Bar) Bolt-On Kit” ¥53,000 (excluding tax)

    〇A kit that combines the ANGEL WING sissy bar with a round plate type that has a strong old school feel.


    Rear Fender

    2%er Rear STD Short Fender [SR400/500]” ¥15,000 (excluding tax)

    〇A short fender with ribs around the perimeter like the original, which suits all kinds of designs.


    Tail Lamp

    Lucas tail lamp with pedestal Japanese standard number size“ ¥8600 (excluding tax)

    ◯ This tail lamp is easy to use with a Japanese standard number size, while having the nice atmosphere of an imported body. It requires hole drilling in the rear fender.

    “Aluminum Back Plate for Number Plate Reinforcement

    〇 An aluminum plate 2mm thick for reinforcing a number plate that is already starting to crack or to prevent cracking.


    Rear Shock

    “280mm G-Suspension/Chrome” ¥26250 (excluding tax)

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)


    Rear Tire

    LOADSTAR TIRE 4.50-18” ¥14500 (excluding tax)

    〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.


    Rear Blinker

    Star Bean Blinkers, Set of 2, Chrome

    〇World’s smallest size E-mark certified, inspection OK ultra-small blinker.

    “Universal Number Side Blinker Stay II A Type” ¥3,300 (excluding tax)

    〇Stay for attaching the ultra-small “A type blinker” on the lower side of the number plate.


    Rear sprocket SR400/500 428-56” ¥4000 (excluding tax)

    〇A durable sprocket made of steel.


    O-ring chain 428-130L” ¥9000 (excluding tax)

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.