FrontHandlebars, F forks, headlights, etc.

●The front end, with a 30cm long front fork laid back at a 2° rake triple and small diameter tire selection, not only has the look of a chopper, but also greatly alleviates the heaviness of handling when the fork is lengthened. This is combined with the new riser-less pullback handlebar.

---

【Front Fork Area】

“2° Rake Triple Tree” ¥105,600 including tax

〇Not only for improving driving performance and reducing fatigue, but also for extending the front wheel forward to enhance the chopper style, this is an aluminum stem. The offset of the wheel position (shortening of the trail width) greatly reduces the heavy handling that is common with long forks.

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]” ¥19,580 including tax

〇High-quality stainless steel fork joint.

“SR400/500 15cm long inner tube kit” ¥68,200 including tax

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]” ¥19,250 including tax

〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind the extended fork.

“Front Fork Dust Seal” ¥2,640 including tax

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is extended.

“Welding Side Stand Extension Plate” ¥3,520 including tax

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

---

【Front Fender】

“2%er Short Front Fender STD [SR400/500]” ¥13,750 tax included

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original

---

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]” ¥11,000 including tax

〇You can change to a classical style by sticking it on a normal drum brake.

“SHINKO flute 3.00-18” ¥14,080 including tax

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

---

【Handle/Surroundings】

“Riserless Narrow Pullback Handle” ¥27,000-

〇A chopper handle that attaches directly to the top bridge.

“2° Handle Post Spacer for Triple Tree” (To be released in mid-2024)

〇A 30mm long spacer for 2° tree, which becomes a solid mount and can be used either above or below.

“Cork Bottle Classical Grip” ¥1,650 tax included

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,598 tax included

 “Amal type slot wire 900mm ’88~’08” ¥3,025 tax included

“600mm Long Brake Cable” ¥5,280 tax included

“300mm Long Clutch Cable” ¥2,200 tax included

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85～00)” ¥4,345 tax included

〇Easy to install mini turn signal switch with coupler on

---

“Handle Lock Weld On Kit” ¥4,620 (tax included)

〇 We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever” ¥4,950 (tax included)

〇 An engine-mounted decompression lever to simplify the area around the handle.

---

【Headlight】

“5.75 inch Bates Light HS Type Chrome” ¥11,550 tax included

〇This is a Bates light with a harness storage type for custom vehicles that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II” ¥2,640 tax included

〇A headlight stay that suits the chopper style well with its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

---

【Front Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,700 tax included

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay” ¥6,380 tax included

〇A stay to attach a 10mm blinker to the bottom of the frame.

---

【Speedometer】

【Small Tank Left Side Meter Kit】¥16,390 including tax

〇A kit that allows you to bolt on a 60φ meter in a place that is easy to see and not noticeable when converting to a small tank such as a sports tank.

『Extension meter cable joint』¥2,090 including tax

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

● Steps that allow your knees to bend moderately and distribute your weight, a seat with high cushioning, and an FCR carburetor that dramatically changes the run of the SR, all contribute to the center area that enhances comfort and the joy of riding. The selection includes a Sportster tank with a natural mounting position that matches well with the normal frame, and a classic drag pipe muffler.

---

【Gasoline Tank】

“Bolt-On Sportster Tank Kit” ¥88,000 including tax

○ A bolt-on Sportster tank designed by 2%ER in the best position for SR, with almost invisible mount stays.

---

【Step】

“Mid-High Control Parkerized for SR400/500” ¥70,950 tax included

〇This step kit is indispensable for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring. (This vehicle has replaced the steps and pegs with white ones)

---

【Muffler】

『Torque cone drag pipe muffler SR400/500』¥39,600 tax included

〇This is a full exhaust muffler with a torque cone developed in-house in the mouthpiece. It is made at an angle that suits any style, such as a normal frame or hardtail.

---

【Seat】

“Old school bucket double seat SR400/500” ¥50,050 tax included

◯ This is the thickest and most comfortable seat among the 2%ER originals, which holds around the hip bone.

---

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit” ¥78,100 tax included

〇Your slow SR will be dramatically transformed. This is a user-friendly carburetor that provides sharp and smooth acceleration.

“Funnel Net for FCR Carburetor” ¥4,290 tax included

〇This is a set of stainless steel trash nets that are sandwiched between the body and the funnel.

“Manifold Kit for FCR39φ” ¥13,200 tax included

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

---

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components (processed to be able to mount a battery).

“BT Type Custom Ignition Switch Bolt-On Kit” ¥7,150 tax included

〇A custom main key that can also be used in vehicles equipped with a battery.

---

【Engine Area】

“Breather filter SR400/500” ¥3,850 tax included

〇This is a filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19” ¥2,200 tax included

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●A popular 16-inch kit combined with rear lowering that balances cushioning and looks. The sissy bar, which can load a lot of luggage from shopping in the city to camping gear, is also a point.

---

【Rear Shock】

“280mm G-Suspension/Chrome” ¥31,763 tax included

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

---

【Sissy Bar】

“FORK Hole Type Sissy Bar Bolt-On Kit” ¥58,300 tax included

〇This is a sissy bar kit that is easy to attach a cargo hook to, with holes in the side plates and an old-school design.

---

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear” ¥30,800 including tax

〇This is a kit that gives a powerful look with the same size as a typical Harley. (Powder coated in black)

“LOADSTAR TIRE　5.00-16” ¥18,150 including tax

〇A classic vintage style tire.

“Drilled plate torque rod SR400/500” ¥6,930 including tax

〇A drilled design torque rod to avoid interference with the wider tire.

---

【Tail Lamp】

“Old Spalt Taillight Polish” ¥14,850 tax included

“Old Sparto Tail Reinforced Number Base” ¥2,640 tax included

〇We have selected a tail with a vintage feel.

“Aluminum Back Plate for Number Plate Reinforcement” ¥1,650 tax included

〇An aluminum reinforcement plate to prevent number plate breakage from vibration and impact.

---

【Rear Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,700 tax included

〇A classic among classics. A chopper-style blinker.

“Rear Bottom Mount Blinker Stay” ¥4,950 tax included

〇A stay to attach the blinker to the swing arm.

---

“Rear sprocket SR400/500 428-56” ¥5,280 tax included

〇A durable sprocket made of steel.

---

“O-ring chain 428-130L” ¥12,764 tax included

〇A replacement drive chain with built-in O-rings.