#277 SR400 THEHIDEAWAYCustom Report
This is a custom order from Mr. Morishita, the owner of “THE HIDEAWAY inc”, who is also a representative of 2%ER. It’s a typical order from him, leaving everything from budget to delivery date and style up to us. We built it in a style that contrasts with his other vintage Harley chopper. The owner himself and his HOTROD fit perfectly into the surrounding environment, and we enjoyed creating a cafe style atmosphere.
We based this on an early model SR400 and focused on ease of riding in the tiring cafe style. We deliberately used a normal processed gas tank without a long tank, narrowed the handle width to 56cm, and installed a BSA type seat under the round frame at a seat height that is about 1.5 pipes lower than the original frame. This makes the forward-leaning posture with the separate handle as gentle as possible, and the position is similar to a flat handle by increasing the drop between the handle and the seat. This processing greatly reduces fatigue from the shoulders to the arms and wrists.
Also, by being able to entrust the weight of the upper body to the seat cowl, the entire upper body is significantly less tired, and the design allows for a more comfortable ride by distributing the weight with the original forward step. This is a big departure from the standard theory of cafe racers, but we have achieved a balance between position and styling for long and enjoyable bike riding. The carburetor has been replaced with an FCR, making it a specification that allows you to enjoy both riding and running in a comfortable position.
The style is a gasoline tank processed in the style of A, J, S, and is installed about 15mm lower by processing the bottom plate to match the lower seat frame. A center ribbed seat cowl that supports the weight is installed. It’s a classic British style with a touch of American flavor, such as front and rear H-type aluminum rims and new left-side up mufflers. The seat cover is something that the staff of “THE HIDEAWAY” put on thinking of President Morishita. We were given full discretion, but we made it in a relaxed manner so that you can ride roughly without spending too much budget.
Although it looks worn out, all the engines and the surroundings of the vehicle have been maintained, adjusted/overhauled. The worn-out atmosphere of the entire vehicle, the gas tank, and the paint of the seat cowl are by “BACON”, who is a partner of 2%ER and a friend of Mr. Morishita. It’s a paint job for Mr. Morishita, with a touch of elegance and mystery in the rough, worn-out atmosphere.
【Start of the Project】

【Collaboration Project】

【Exhibiting at JOINTS2023 with Collaboration!】

【Delivery of the Car】

【Detailed Introduction at the Cool Old Man’s Shop】

【Driving Video】

“JOINTS OLD & CHOPPER DNA 2023 / SR Panic Exhibited Vehicles“
Custom List
FrontHandlebars, F forks, headlights, etc.
●The initial model 19-inch spoke wheel is set with an H-type aluminum rim. The tires are selected from Coker E70. The headlight is a vintage Lucas replica mounted low with a stainless hand-bent light stay, and the handle is made by “CHUCK BOX“, the former home of the 2%ER representative in Shiga Prefecture.
【Headlight】
“Vintage Lucas Replica Headlight Set/Black”
〇A LUCAS replica adopted by old Triumphs, Matchless, Norton, etc., with an ammeter and switch panel. The large, round lens is also a feature.
【Handle/Handle Area】
〇Extremely thick stainless steel, extremely simple handmade separate handle. (Cut to length for use)
“Amal type throttle holder, general purpose (for 7/8″)“
〇A very simple, classic vintage style throttle.
“Diamond Grip Black 22.2mm 7/8“
“Amal type slot wire 800mm ’88~’08“
“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇Easy installation with the coupler-on mini turn signal switch
【Stem】
“2%er Top Bridge Ⅰ for separate handle [SR400/500]“
〇A classic style top bridge without holes for bar handles. (The meter stays are smoothed out for a simpler finish)
〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.
A decompression lever directly attached to the engine to simplify the area around the handle.
【Meter】
〇A meter kit that can be bolted on the inside of the fork when viewed from the front, exclusively for small tanks.
【Front Blinker】
(Discontinued ⇒ Now changed to Star Bean Blinkers, Set of 2, Black)
“Universal Blinker Stay 10A Type Steel”
〇The ultra-small micro blinker is installed on the front side of the lower engine mount.
CenterTank, oil tank, seat, step, muffler etc.
● The distinctive gas tank is a genuine processed product. By providing a getaway for the separate handle, it is set to a position that is larger than usual and has a gentle forward-leaning posture. The round frame like the old BSA is hand-bent. The frame height, seat cowl mounting position, step position, etc. are finished in an extremely easy-to-ride design even among cafe styles. The carburetor is replaced with FCR to match the good left-up exhaust muffler. It is a specification that you can enjoy running.
【Muffler】
“Left Side Up Muffler Trumpet”
〇A left side up muffler. It’s a steel exhaust pipe with a stainless steel trumpet silencer. Good sound.
(This vehicle leaves a handmade feel by not polishing the welding part of the exhaust pipe finished in black, and the trumpet silencer)
〇A heat-resistant bandage to prevent burns.
【Seat】
“One-off Seat”
◯The seat cover is handmade by THEHIDEAWAY staff.
◯It acts as a stopper for the upper body weight. By holding up to the hip bone, you can ride more comfortably than you imagine.
【Carburetor】
“FCR Carburetor 39φ/Anodized Specification”
◯ A carburetor that is easy to handle with sharp and smooth acceleration. It is in a black anodized specification that contrasts well with the color scheme of the vehicle.
〇 It is a dedicated adapter to firmly fix the FCR carburetor to SR400/500.
(Other company’s products are used in this vehicle)
“Funnel Net for FCR Carburetor”
〇 It is a net to avoid debris that could cause major damage to the engine while maintaining smooth air intake resistance.
【Gasoline Tank】
“Genuine Processed Gas Tank”
〇A normal tank that has been carved on the side panel in the style of A, J, S 7R, creating a space for the separate handlebars. It is mounted low with a backplate process.
【Frame】
“Round Frame Processing”
〇A classical frame made by cutting a normal frame and bending it by hand. The shock absorber is also handmade.
【Electrical Equipment】
“IC blinker relay wide range specification“
〇A wide-range blinker relay that can easily be used with LED blinkers, supporting 1-150 watts. It can also be used as a replacement for the original relay.
〇This is a battery-less kit that is made entirely in Japan.
【Ignition】
“Custom Ignition Switch Bolt-On Kit”
〇This is a kit that allows you to attach a small ignition switch to your preferred position with an M6 bolt.
【Engine】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
●The rear wheel is fitted with a Pirelli MT53 replica on a one-size-wide 18-inch H-type aluminum rim, with the suspension receiving position offset to the inside. The rear shock is installed in line with the swing arm and mounted slimly. The subframe supporting the seat cowl, number plate, and tail lamp is hand-bent and made. It is a bolt-on detachable type.
【Rear Shock】
〇A rear shock that is about 4cm down. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
(This vehicle has been modified to mount the suspension receiver in line with the swing arm for a slim fit)
【Rear Fender】
“5-inch Aluminum Center Rib Fender without Buff”
〇A 5-inch wide universal fender made of aluminum. It is used as an inner fender visible from under the seat.
【Tail Lamp】
〇An extremely small tail lamp with a width of 63mm and a height of 28mm.
【Rear Blinker】
〇An extremely small blinker with a diameter of 11mm and high brightness.
『Number Side Blinker Stay A Type』
〇A stay that allows you to attach an ultra-small blinker to the number plate.
【Rear Wheel】
“H aluminum rim SR rear, one size up“
◯ The high-shoulder aluminum rim, often used for exterior finishing, has a wider one-size and enhances presence.
(This vehicle is equipped with an aging-processed version)
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.