#27 SR400

Custom Bike

#27 SR400Custom Report

This is a vehicle that has been customized in addition to the complete “STD Street “.

The basic silhouette includes,

and so on.

It’s a standard street style with voluminous high tires and a low-down stance.

 

Custom List

FrontHandlebars, F forks, headlights, etc.

Front Fender

2%er Short Front Fender STD [SR400/500]

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.

SR400/500 Front fender upper stay

〇A plate to lift and attach the fender when using tires with height.


Front Tire

LOADSTAR TIRE 4.00-18

〇A classic watermelon pattern, high vintage style tire.


Headlight

5.75 inch Bates Light Black General Purpose

SR Bottom Mount Light Stay

〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.


Handle/Handle Area

Street Low Handle Black

Amal type throttle holder, general purpose (for 7/8″)

Chopper Grip Black 22.2mm 7/8inch

Amal type slot wire 900mm ’88~’08

Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500

Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS

The handle is a Street Rover with a natural curve compared to the standard one. Simple throttle and various cables are used.


Switch

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

(Modified to fit different model years and small headlights)


MOTOR ROCK Decompression lever

A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)


Front Blinker

Small Bullet Turn Signal Matte Black 4pcs SET General Purpose

〇A classic among classics. A chopper-style blinker.

SR400/500 Bottom Mount narrow blinker stay

〇A stay to attach a 10mm blinker to the frame bottom.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4

〇A standard small meter. It comes with a trip meter.


CenterTank, oil tank, seat, step, muffler etc.

Muffler

“Exhaust Pipe Flange Set for One-off Pipe Production”

〇A one-off exhaust pipe made using a convenient production kit for the root mouthpiece. The muffler is a one-off processed by WM. It resembles the original “Slip-On Megaphone Muffler for SR400/500“, but a JMCA certified muffler is used due to the owner’s occupation and the location of the house.


Step

Mid-High Control Parkerized for SR400/500

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.


Seat

Slim Double Sheet Bates Type Tuck Roll for SR400/500

〇You have chosen a slim and simple tuck roll seat, which can be selected from 7 types.


Electrical Equipment

Brat Style Electrical Plate

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

IC blinker relay wide range specification

〇A wide-range turn signal relay that can handle 1-150 watts and can be used without difficulty with LED turn signals. It can also be used as a replacement for the original relay.

Battery Lesser

〇This is a battery-less kit that we manufacture in Japan.


Gasoline Tank

◯Optional specification glitter paint, old model narrow gas tank. (The complete set comes with a 13-liter tank with solid paint.)


Engine Area

Breather filter SR400/500

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    Rear Shock

    “280mm G-Suspension/Black”

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)


    Rear Tire

    LOADSTAR TIRE 4.50-18

    〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.


    Rear Fender

    2%er Rear STD Short Fender [SR400/500]

    〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.


    Tail Lamp

    “Sparto Tail Lamp/Black”

    〇A classic simple Sparto tail lamp. It is in black.


    Rear Blinker

    “Small Bullet Blinker/Black”

    〇A classic among classics. A chopper-style blinker.

    “Rear Bottom Mount Blinker Stay”

    〇A stay to attach the blinker to the swing arm.


    【Drive System】

    Rear sprocket SR400/500 428-56

    〇A durable sprocket made of steel.

    O-ring chain 428-130L

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.