#261 SR400Custom Report
This is the SR400 ordered by a petite girl with a height of 148cm from Mie Prefecture.
While taking advantage of the SR’s strengths, it was produced in a more simple 【2%ER №2 STD Street Complete】specification. Each part was selected while considering the owner’s preferences, and it was produced in a standard and classic silhouette that never gets old.
It was finished with easy footing and rideability, even for petite women.
In response to the opinion often received from many female owners that “it’s hard to put out the turn signal while holding the clutch”, we have reduced the weight of the lever by replacing it with a clutch spring of a higher model year. Even if your hands are small and your grip strength is weak, we have made changes so that subtle movements such as half-clutch can be operated lightly.
“Check out other 2%ER Street Bobber custom samples here”
◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』
Custom List
FrontHandlebars, F forks, headlights, etc.
●Considering safety, we have reused high-year model disc brakes and forks for the front end (approved vehicle inspection obtained). We have changed everything such as fenders, headlights, speedometers, and turn signals to simple and compact ones. We have also removed the original large switch box around the handle and switch, replaced it with a small and classical one, and finished it neatly.
【Front Fender】
“2%er Short Front Fender STD [SR400/500]“
〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original
【Headlight】
“5.75 inch Bates Light Black Body/Chrome Rim”
〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.
【Handle/Handle Area】
“Amal type throttle holder, general purpose (for 7/8″)“
“Amal type slot wire 900mm ’88~’08“
“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“
“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARSClutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“
The handle is a Street Rover (Black) with a natural curve compared to the original. We use each cable with a simple throttle.
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇A mini turn signal switch that is easy to install with a coupler on
(It is installed with modifications on different model years and small headlights)
“MOTOR ROCK Decompression lever“
A decompression lever directly attached to the engine to simplify the handle area
【Speedometer】
“Mechanical Speedometer 60mm Black Panel 1:4“
〇A standard small meter. It comes with a trip meter.
【Turn Signal】
“Small Bullet Turn Signal/Black”
〇A classic among classics. A chopper-style turn signal.
“SR400/500 Stem Mount Winker Stay B Type“
〇A high-quality stainless stay to mount a 10mm turn signal on the stem side.
CenterTank, oil tank, seat, step, muffler etc.
●The gasoline tank uses a well-shaped normal one and is painted in the color specified by the owner. The seat has been replaced with a thinner one, significantly improving the ease of reaching the ground with your feet. Under the seat is battery-less (a battery can also be installed), and by removing the side cover, the bulge that hits the thigh is eliminated, making it easier to reach the ground with your feet. The one you chose from “6 types of slip-on mufflers” is a vintage-style domestically produced stainless steel trumpet muffler.
【Seat】
“Slim Double Sheet Bates Type Tuck Roll for SR400/500“
〇You have chosen a slim and simple tuck roll seat, which can be selected from seven types.
【Muffler】
〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
“IC blinker relay wide range specification“
〇A wide-range turn signal relay that can handle 1-150 watts without any difficulty, even for LED turn signals. It can also be used as a replacement for the original relay.
〇This is a battery-less kit that we manufacture in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
●The rear shock is lowered by about 55mm and combined with a slim seat, making it easy for owners of short stature to reach the ground. The rear fender and tail lamp have also been replaced with simple and classic ones.
【Rear Shock】
〇A rear shock that lowers by about 5.5cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Rear Fender】
『2%er Rear STD Short Fender [SR400/500]』
〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.
【Tail Lamp】
〇A classic simple Sparto tail lamp. It is in black.
【Rear Blinker】
● A classic among classics. A chopper-style blinker.
“Rear Bottom Mount Blinker Stay”
● A stay to attach the blinker to the swing arm.
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.