Home » #215 SR400

#215 SR400

2020.10.21

Custom Bike

#215 SR400Custom Report

This is an SR400 ordered by a young person in Kobe. Using the original gas tank and fender, we created a full-fledged chopper style ○ “№9 STD Chopper Complete” in a short delivery time and at a reasonable price. This is a vehicle that we prepared from the base vehicle according to the order.
Despite the small number of customizations, it follows the manners of chopper production at the time, and is a complete specification with a good balance of price, style, and ease of riding.
The only additional option is the aging paint of the gas tank by ○ “BACON“. (Usually, it is your favorite single color or solid paint) This is a sample vehicle where the atmosphere greatly improves with the addition of paint.
The full exhaust muffler, which is not a standard specification, was originally installed on the purchased base vehicle, and the owner liked it and adjusted the length and angle of the end cut and used it. The difference in muffler cost was applied to the option of gas tank paint production.

(This is a sample of the STD Chopper Complete)

【Detailed Explanation, Introduction Video】

Cookie consent is required to display this video.

Cookie Settings

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇High-quality stainless steel fork joint. It increases straight-line stability at high speeds, making long rides less tiring.

“Welding Side Stand Extension Plate”

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Headlight】

“5.75 inch Bates Light Chrome General Purpose“

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

“Bottom Mount Light Stay II“

〇A headlight stay that fits well with the chopper style due to its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Handle】

“2%er 70’s Pull-back Handle“

“Barrel Grip”

“Amal type throttle holder, general purpose (for 7/8″)“

◯The handle area, controls, meters, and ignition-related parts are neatly processed in the 2%ER standard style.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

(It is installed with modifications on different model years and small headlights)

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style turn signal.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm turn signal to the bottom of the frame.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

CenterTank, oil tank, seat, step, muffler etc.

• The gasoline tank has an additional design paint by “BACON” on the original tank.

【Seat】

“Old School Double Seat”

〇It’s a standard seat for 2%ER’s normal frame custom, with features like button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any difficulty, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“