Home » #207 SR400

#207 SR400

2020.7.31

Custom Bike

B-Class-Chopper CHOPPER SR SR400/500 Hardtail

#207 SR400Custom Report

This is an SR400 for two riders, with a narrow chopper feel added through part selection and option additions, based on the ○ “STD Hardtail Complete” ordered from Shonan.
Keeping the owner’s requests as our top priority, we used standard parts to create a vehicle with a comfortable ride that you wouldn’t expect from a rigid frame without rear shocks, by focusing on the overall silhouette, balanced placement of each part, the angle of the solo saddle seat, the mounting position of the pillion pad, and the step position.
The rust and wear processing applied to the entire vehicle is by the patina painter “BACON“, who now receives orders from all over the world. This time, at the owner’s request, we had him paint rust flowing on the gas tank.

The owner of this vehicle is a member of the street brand Lafayette, originated in Shonan, and has been a member of the original art group “THE NEACRAP” since 2017, managing the group while running his own used clothing shop “Mustard Workers“, handled by Takushi (Instagram: @mustard_workers).

【Order from afar, delivery explanation video】

Cookie consent is required to display this video.

Cookie Settings

【Detailed explanation and introduction of the entire vehicle】 (about 10 minutes)

Cookie consent is required to display this video.

Cookie Settings

【Driving movie (height 170cm, about 4 minutes)】

Cookie consent is required to display this video.

Cookie Settings

【Click here for the blog article during production】

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“Front fork 5cm joint pair for SR400/500“

〇It is a high-quality stainless steel joint made in Japan.

【Front Wheel】

『SR400/500 21inch kit for front』

〇A wheel kit that results in a narrow, large-diameter, sharp style.

『Starburst Hub Cap』

〇This is an aluminum polished finish hub cap that is easy to attach to the drum hub.

【Headlight】

“4.5-inch Bates Light Chrome General Purpose“

〇A classic small Bates light that suits a narrowed front.

“Bottom Mount Light Stay II“

〇A headlight stay that suits the chopper style well with its moderate height and protrusion.

【Handle/Handle Area】

“One-off Riserless Z-Bar”

◯ It is connected left and right with a loose twist bar to a degree that you won’t get tired of.

“Barrel Grip”

“Amal type throttle holder, general purpose (for 7/8″)“

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

(It is installed with modifications on different model years and small headlights)

“Handle Lock Weld On Kit“

● It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

【Front Blinker】

“Small Rubber Winker Smoke Set of 4“

“Diamond Winker Stay Front Black SR400/500“

◯It is attached to the lower part of the frame.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, where it is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

• The gasoline tank is the narrow sportster tank from the sample vehicle of “STD Hardtail Complete“. It is safely mounted with a 3-point rubber mount. The flowing rust-like aging paint was requested from “BACON“.

【Muffler】

“Exhaust Pipe Flange Set for One-off Pipe Production”

〇Use a convenient production kit for the root mouthpiece and make a one-off production. It’s a simple drag pipe.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is indispensable for the 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring. Combined with the way the seat is attached, it is designed to be less tiring even without a rear shock, while being rigid.

【Seat】

“BATES Type Genuine Leather Solo/Pillion Set Vertical Tuck Roll“

〇A seat set made of genuine leather with good cushioning. The spring input position and angle settings, as well as the pillion pad mounting position, are set up in a unique 2%ER configuration that reduces fatigue.

(Discontinued) ⇒Genuine Leather STD Solo Saddle Seat/Pillion Pad Set

“Solo Saddle Seat 2 Inch Spring Comfort Mount Set”

〇A mount kit that is easy to install on custom frames and the like. The lever ratio can also be changed, allowing for good cushioning.

【Electrical Equipment】

“SR400/500 Custom Electrical Plate #2%er Original #SR400/500“

〇All electrical components except for the CDI are consolidated at the rear of the engine crankcase. It is easy to maintain as it can be accessed with both hands from either side of the vehicle, and there is no need to reassemble even if you revert to the swing arm specification during vehicle inspection.

“Battery Lesser“

〇This is a battery-less kit made entirely in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, it is welded and installed under the left side of the seat.

【Engine Area】

“2%er Fin Tappet Cover (a pair)[SR400/500]“

◯ A tappet cover with a heat-dissipating fin, featuring a rib design as an accent.

RearFenders, rear shocks, swingarms, etc.

【Hardtail】

『“Rigid Line” Bolt-On Hardtail Kit』(13cm long, made-to-order)

〇As the name suggests, it’s a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to make it a rigid line. You can revert to the swing arm/rear shock specification when you have a vehicle inspection or want to change the style.

◯A small, inconspicuous tandem step is attached to the hardtail joint part.

【Rear Wheel】

“Rear drum starburst cover SR400/500“