#172 SR400

Custom Bike

#172 SR400Custom Report

From the “10 Types of SR400 Complete Custom” of 2%ER, the “STD Hardtail Complete” was selected, and it was custom-made with only the standard select parts of the complete, with almost no additional options.

The exterior parts such as the tank/fender, lights/turn signals, handlebars, mufflers, and all other select parts were chosen to be simple and standard, and were arranged in a balanced manner. It is a traditional bobber style custom, painted in a light champagne gold as per the owner’s wish.

The only additional option is the “BATES Type Genuine Leather Pillion Pad”. It was added as a functional part that can significantly reduce the force needed to support the body weight by holding onto the handlebars during riding, by setting it in a position that acts as a stopper for body weight during acceleration.

 

“2%ER’s SR400/500 STD Hardtail Complete is here”

 

“Hardtail Custom Order Vehicle Gallery is here”


【Detailed Introduction Video】

Cookie consent is required to display this video.

【Driving Video】

Cookie consent is required to display this video.

Cookie consent is required to display this video.

 

Cookie consent is required to display this video.

 

Cookie consent is required to display this video.

Custom List

FrontHandlebars, F forks, headlights, etc.

Front Fork

Fork boots, general-purpose

〇Classic universal fork boots.


Front Tire

LOADSTAR TIRE 4.00-18

◯ A classic watermelon pattern, a vintage style tire with height.


Headlight

5.75 inch Bates Light Chrome General Purpose

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

Bottom Mount Light Stay II

〇A headlight stay that fits well with the chopper style due to its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)


Handle/Handle Area

◯The simple riser-less integrated handle is custom-made. It was created with a width and height that is easy for the owner to handle.

Amal type throttle holder, general purpose (for 7/8″)

◯The handle area, controls, meter, ignition-related parts are all neatly processed in the standard 2%ER style.


MOTOR ROCK Decompression lever

A decompression lever directly attached to the engine to simplify the area around the handle.


Front Blinker

Small Rubber Winker Smoke Set of 4

Diamond Winker Stay Front Black SR400/500

◯It is attached to the lower part of the frame.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4

Universal Speedometer Stay

〇Mounted on the left front side of the gasoline tank, where it is inconspicuous and highly visible.


CenterTank, oil tank, seat, step, muffler etc.

Muffler

◯ A short one-off drag pipe with a slip-on attached to the normal exhaust pipe. A slight movement is added to the end as a small accent.


Seat

BATES Type Genuine Leather Solo/Pillion Set Vertical Tuck Roll

〇A seat set made of genuine leather with good cushioning. The spring input position and angle are set and the pillion pad is installed in a position that is unique to 2%ER and less likely to cause fatigue.

(Discontinued) ⇒Genuine Leather STD Solo Saddle Seat/Pillion Pad Set

“Solo Saddle Seat 2 Inch Spring Comfort Mount Set”

〇A mount kit that is easy to install on custom frames and the like. The lever ratio can also be changed, allowing for good cushioning.


Electrical Equipment

IC blinker relay wide range specification

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

Battery Lesser

〇This is a battery-less kit that is made entirely in Japan.


Gasoline Tank Installation

“Narrow Sportster Tank for Production”

Welding nut non-through M8 2p

〇Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

Weld tab M size 4.5mm thickness 2p

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

Weld tab L size 4.5mm thick steel 2p

〇Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.


Engine Area

Breather filter SR400/500

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    Hardtail

    “Rigid Line” Bolt-On Hardtail Kit』(5cm Long)

    〇As the name suggests, it is a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to make it a rigid line. You can revert to the swing arm/rear shock specification when inspecting the vehicle or changing the style.


    Rear Tire

    “Roadster 4.50-18 Tire”

    〇Vintage style, watermelon pattern classic tire.


    Tail Lamp

    Lucas tail lamp with pedestal Japanese standard number size

    ○A Lucas tail lamp, a staple for choppers, compatible with Japanese standard number plates.


    Rear Fender

    ◯The rear fender is a classic flat fender. The pale gold with a chrome-plated tail lamp body is a good match.


    RearTurn Signal

    Small Rubber Winker Smoke Set of 4

    Weld tab S size 4.5mm thick steel 2p

    〇Welded in front of the rear axle. Used as a turn signal base.


    Drive System

    Rear sprocket SR400/500 428-56

    〇A durable sprocket made of steel.

    O-ring chain 428-130L

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.