FrontHandlebars, F forks, headlights, etc.

•The front area has been refreshed with a stem bearing replacement and a front fork overhaul.

---

【Front Tire】

【LOADSTAR TIRE 4.00-18】

◯ A classic watermelon pattern, high vintage style tire.

---

【Headlight】

“4.5 inch Bates Light Black General Purpose“

---

【Handle/Handle Area】

“Harley Type Replica Riser 4.5inch SR400/500“

◯We have set up a comfortable position with a 4.5-inch riser and a drag bar handle for easy operation.

“Amal type throttle holder, general purpose (for 7/8″)“

◯The handle area, controls, meters, and ignition-related parts are neatly processed in the standard 2%ER style.

---

“Handle Lock Weld On Kit“

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

---

【Front Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the bottom of the frame.

---

【Speedometer】

“Minimeter Fork Mount Kit SR400/500 XS650 #2%er Original #SR400/500“

CenterTank, oil tank, seat, step, muffler etc.

• The exterior parts such as the tank, fender, and seat are selected by you and installed compactly. Without doing anything unnecessary, everything was mounted in a “position suitable for SR”.

• The engine area, which has improved significantly due to careful repairs such as cam chain adjustment, tappet clearance adjustment, and carburetor O/H and setting, can be ridden comfortably without any breakdowns.

---

【Muffler】

“Exhaust Pipe Flange Set for One-off Pipe Production”

〇Use a convenient production kit for the root mouthpiece and make a one-off production. It’s a simple drag pipe.

---

【Step/Shift】

“Mid-High Jockey Shift Kit Chrome for SR400/500“

〇Maintaining the comfortable riding posture of the mid-high step, this is a jockey shift kit that focuses on operation feel such as touch and stroke.

---

【Seat】

“BATES Type Genuine Leather Solo Saddle Seat Vertical Tuck Roll Black/White“

〇A genuine leather solo saddle seat with a balanced price, look, and comfort. It is installed with a soft ride that is less likely to bottom out by changing the mounting angle and spring input position.

(Discontinued) ⇒Genuine Leather STD Solo Saddle Seat Black

“Solo Saddle Seat 2 Inch Spring Comfort Mount Set”

〇A mount kit that is easy to install on custom frames and the like. You can also change the lever ratio and create a good cushioning effect.

---

【Electrical Equipment】

“SR400/500 Custom Electrical Plate #2%er Original #SR400/500“

〇All electrical components except the CDI are consolidated at the rear of the engine crankcase. It is easily accessible from either side of the vehicle and has good maintainability. There is no need to reassemble even if you return to the swing arm specification during vehicle inspection.

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can be used without difficulty even with LED turn signals, compatible with 1-150 watts. It can also be used as a repro for the original relay.

“Battery Lesser“

〇This is a battery-less kit that we manufacture in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, welded on the lower left of the seat.

---

【Gasoline Tank Installation】

“Narrow Sportster Tank”

“Welding nut non-through M8 2p“

〇Drill a hole in the gasoline tank body, insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

---

【Kick Pedal】

“Chrome Kick Pedal“

---

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

• We finished it with a flat fender reinforced on the back, an old-school tail lamp, and a one-off sissy bar. We carefully arranged classic selections such as Lucas tail lamps to avoid a childish look.

---

【Hardtail】

『“Rigid Line” Bolt-On Hardtail Kit』(5cm Long)

〇As the name suggests, it’s a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to a rigid line. You can revert to a swing arm/rear shock specification during vehicle inspection or when changing styles.

---

【Rear Tire】

“Roadster 4.50-18 Tire”

〇A classic watermelon pattern, a vintage style tire with height.

---

【Tail Lamp】

“Lucas Small Tail Aluminum Number Base Set General Purpose“

◯ A classic small Lucas tail lamp of the L525 type that suits all styles.

---

【Rear Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“Weld tab S size 4.5mm thick steel 2p“

〇Welded onto the hardtail. Used as a blinker base.

---

【Drive System】

『Rear sprocket SR400/500 428-56 』

〇An affordable and durable replacement sprocket.