Follow 2%er
Home » #139 SR400

#139 SR400

Custom Bike

#139 SR400Custom Report

The owner brought in an SR400 that was handed over from a friend in a disassembled state to 2%ER, where it was serviced and assembled for inspection.

At first, the owner rode it with light customization, but with each inspection, the bike was gradually customized using used parts, one-off parts, original bolt-on parts, etc., and it took on this form by the third inspection.

The style was created as a slightly belly-up B-class chopper.

The owner, who used to scrape the step bar even with the mid-high step when using the normal fork, has increased the vehicle height by attaching a springer fork from another vehicle. The front disc brake has been approved for inspection.

The bike was put together in a tacky, cool way with a deliberately wide robot handle.

The frame is basically normal, but the rear subframe has been cut and remodeled so that the so-called “droopy strut” and fender of the Shovel Sportster can be bolted on.

 

Cookie consent is required to display this video.

 

Cookie consent is required to display this video.

 

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork】

◯ A springer fork about 13 cm long, modified and diverted from other vehicles.

“Welding Side Stand Extension Plate”

〇 A plate for extending the side stand. Welding is required.

【Front Wheel】

◯18 inches with FUCKSTONE tires, certified disc brakes.

Similar products are here↓

【LOADSTAR TIRE 4.00-18】

【Headlight】

◯Deadstock from the UK, a square light made by Mirror. It’s a bit dark, but it has a HI/LO switch.

【Handle/Handle Area】

◯A wide Z-bar made to order in stainless steel.

“Amal type throttle holder, general purpose (for 7/8″)“

◯Although it was made in a plain style, the brake master, throttle, and switches have been changed to smaller ones.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

“Handle Lock Weld On Kit“

〇Install a new handle lock on the lower part of the under bracket.

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)

【Front Blinker】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style blinker.

【Speedometer】

“Mechanical speedometer φ48mm [No trip 1:4] General purpose #General-purpose parts“

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Down Fish Tail“

◯ A key part in creating the old-school chopper style with a raised belly. It has a good exhaust and sound.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.

【Seat】

“BATES Type Genuine Leather Solo/Pillion Set Vertical Tuck Roll“

〇A seat set with good cushioning made of genuine leather. It was installed as low as possible on the normal frame. The pillion pad is mounted close to the solo seat, making it easier to shift your weight during touring and making it even more comfortable.

【Electrical Equipment】

“Genuine Ignition Switch Location Stay (~`02) SR400/SR500“

◯ Relocate the standard main key to the less noticeable front left of the gas tank with a bolt-on.

“Brat Style Electrical Plate“

〇 A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇 A wide-range turn signal relay that can be used without difficulty even with LED turn signals. It can also be used as a replacement for the standard relay.

“Battery Lesser“

〇 A battery-less kit that is manufactured in Japan.

【Gasoline Tank】

◯The custom-made gas tank is an egg type with a center rib. It is mounted slightly raised for the owner who also goes on long tours.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

    • RearFenders, rear shocks, swingarms, etc.

    • The rear area has been modified by cutting the normal subframe and rebuilding it to allow for bolt-on attachment of the Iron Sportster’s strut/rear fender.

    【Rear Shock】

    “280mm G-Suspension/Chrome”

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

    【Sissy Bar】

    ◯The simple sissy bar is a one-off production.

    【Tail Lamp】

    “Bee High Tail Light Chrome“

    【RearTurn Signal】

    『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

    〇A classic among classics. A chopper-style turn signal.

    【Drive System】

    “Rear sprocket SR400/500 428-56“

    〇A durable sprocket made of steel.

    “O-ring chain 428-130L“

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.