Follow 2%er
Home » #137 TW200

#137 TW200

Custom Bike

#137 TW200Custom Report

This is a middle-class cc rigid chopper based on the TW200, which can also serve as a substitute for clogs.

Based on the half-disassembled TW brought in, the rear frame was converted into a hardtail, the neck gusset plate was removed to change it into a chopper frame, and the front legs were reassembled for SR use and turned into a long fork with 2%ER’s original parts.

The exterior parts were made to order according to the owner’s preference, and the seat and handle position were adjusted to create a mid-high step, not only in looks but also in riding posture, to make it a full-fledged chopper.

Of course, we have paid attention to a comfortable ride and handling feel.

The exterior paint is ” BACON “. It was finished with a light aging effect.

Expressing the owner’s individuality and self-assertion based on a cheap domestic car that could never be achieved with a foreign car base,

It’s a domestic chopper that can be used for everyday use and stands out on the streets of Japan.

 

〇　Click here for related blog articles

 

Cookie consent is required to display this video.

Cookie consent is required to display this video.

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork Area】

◯ The front area has been reassembled for SR and has been made into a long fork with original parts.

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇 High-quality stainless steel fork joint.

“SR400/500 15cm long inner tube kit“

〇 A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]“

〇 A stabilizer that is extremely effective in correcting the handling that tends to lag behind the extended fork.

【Front Tire】

“SHINKO flute 3.00-18”

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a roundness of 3.00.

【Headlight】

“Old Bates Type Side Mount Light Kit SR400/500 XS650“

◯Reproduced from vintage models of the time, suitable for SR and XS. It matches seamlessly with the old school chopper style.

【Handle/Handle Area】

“Narrow Drag Bar Handle”

〇A narrow flat handle with a short clamp section.

“Flanders Replica Riser 2.5 Inch“

◯The handle was assembled by adjusting the height to fit comfortably in the hand and the appearance.

“Amal type throttle holder, general purpose (for 7/8″)“

“Chrome British Car Type Clutch Lever“

“Chrome British Car Type Brake Lever“

◯Controls are simplified with mini switches, etc., not only improving the appearance but also the maintainability. This is a recommended treatment.

“Handle Lock Weld On Kit“

〇It is intended for use on the street, so it is added to the under bracket.

【Front Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

【Speedometer】

“Mechanical speedometer φ48mm [No trip 1:4] General purpose #General-purpose parts“

“Extension meter cable joint“

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

• The gasoline tank is a small peanut tank. It’s finished with a tasteful aging paint job by “BACON“.

【Step】

◯We created it as a genuine chopper not only in looks but also in riding posture, thanks to the mid-high step.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.

“Custom Ignition Switch Weld On Kit General Purpose“

〇The main key, which is originally on the top bridge, is easy to operate even while riding, and is welded and installed under the left side of the seat.

    • RearFenders, rear shocks, swingarms, etc.

    • The hardtail modification around the rear, which was the starting point of this custom, brings the off-road vehicle TW closer to the chopper taste in one go.

    【Rear Tire】

    ◯The voluminous rear tire is a 15-inch Yokohama for cars.

    【Rear Fender / Sissy Bar】

    ◯We have attached a center rib fender of appropriate length to match the tire width. The sissy bar is made with an orthodox fork line that is not too childish and not overdone.

    ※Parts Reference may show similar products or products with additional processing.