#129 SR500
Custom Bike

#129 SR500Custom Report
The SR500, which was created with the concept of a custom bike based on a 1960s British car, with a sissy bar attached to the scrambler.
It’s a street style from the time when we used to tie up our luggage and run on unpaved roads.
Without changing the dimensions of the front and rear suspension, it has neutral handling, a comfortable seat, and a rough riding position with mid-high position steps,
It’s a comfortable custom with a selection of tires that can run on both dirt and road, adding to the style and ride.


Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fork】
〇Classic universal fork boots.
【Front Wheel】
◯The combination of a 19-inch cast wheel and ALL STATE Dirtman tires gives the atmosphere of the street style of the time when driving on unpaved roads.
【Headlight】
5.75 inch Bates Light Chrome General Purpose
〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.
〇You can mount the headlight in a recessed position without any trouble.
【Handle/Handle Area】
“Flanders Replica Riser/4inch” SR400/500“
◯ A set of continental handlebars on a riser modeled after the old Flanders. It’s a style that looks like just lifting the handle of a British bike with a riser.
Similar products are here↓
“Amal type throttle holder, general purpose (for 7/8″)“
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇Easy to install mini turn signal switch with coupler on
“MOTOR ROCK Decompression lever“
〇 A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)
【Front Blinker】
“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“
〇A classic among classics. A chopper-style blinker.
“SR400/500 Bottom Mount narrow blinker stay“
〇A stay to attach a 10mm blinker to the bottom of the frame.
【Speedometer】
” Inside meter kit for drum brake SR400/500 #2%er Original #SR400/500“
◯ It’s a speedometer kit that doesn’t stand out and doesn’t ruin the style, but has good visibility while riding.
CenterTank, oil tank, seat, step, muffler etc.
• The unique rounded gasoline tank is a modified Harley Aermacchi one. It is mounted with rubber after careful repair. The aging process, which is not noticeable in the photos, is done by “BACON“.
【Muffler】
“One-off Pipe Manufacturing Exhaust Pipe Flange Set”
〇A scrambler-style up-muffler made one-off using a convenient manufacturing kit for the mouthpiece at the root.
【Step】
“Mid-High Control Parkerized for SR400/500“
〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.
【Seat】
◯The seat is a one-off Bates TT type. We paid attention to the internal urethane and made it with good cushioning. (Bates TT type seat SR400/500)
【Electrical Equipment】
“Genuine Ignition Switch Location Stay (~`02) SR400/SR500“
◯ Relocate the standard main key to the less noticeable front left of the gas tank with a bolt-on.
“IC blinker relay wide range specification“
〇 A wide-range turn signal relay that can handle 1-150 watts and can be used without difficulty even with LED turn signals. It can also be used as a replacement for the standard relay.
〇 This is a battery-less kit that we manufacture in Japan.
【Side Cover】
◯ It’s a classical side cover with a round shape.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
【Rear Tire】
◯Firestone ANS, envisioning the image of racing through unpaved roads
【Rear Subframe】
“Loop Frame for SR400/500 and Others“
〇This is a steel pipe for processing the rear loop frame.
【Rear Fender】
〇A classic, simple flat rear fender. It is modified and installed in the Frisco style by adding side panels and the like.
【Tail Lamp】
“Old Sparto Tail Reinforced Number Base“
◯Among the many replicas, this tail lamp has a particularly good atmosphere.
【Rear Blinker】
〇A classic among classics. A chopper-style blinker.
“Rear Bottom Mount Blinker Stay”
〇A stay to attach the blinker to the swing arm.
【Drive System】
“Rear sprocket SR400/500 428-56“
● A durable sprocket made of steel.
● A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.