FrontHandlebars, F forks, headlights, etc.

【Front Fork Area】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇High-quality stainless steel fork joint.

“SR400/500 10cm long inner tube“

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]“

〇A stabilizer that is extremely effective in correcting the handling that tends to lag one beat behind with extended forks.

---

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]“

〇You can change to a classical style by sticking it on a normal drum brake.

---

【Front Tire】

“SHINKO flute 3.00-18”

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a roundness of 3.00.

---

【Headlight】

“Old Bates Type Side Mount Light Kit SR400/500 XS650“

◯A headlight molded from a 1960s vintage Bates. This chopper has a one-off light stand base and is relocated slightly lower than usual.

---

【Handle/Handle Area】

◯ A vintage pull-back handle that angles straight down. The controls are finished in a simple British style with mini switches and the like.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇 A mini turn signal switch that’s easy to install with a coupler on

---

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

---

【Front Blinker】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style blinker.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm blinker to the frame bottom.

---

【Speedometer】

『Mechanical Speedometer 60mm Black Panel 1:4』

『Universal Speedometer Stay』

〇Mounted on the left front side of the gasoline tank, which is inconspicuous and has high visibility.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Exhaust Pipe Flange Set for One-Off Pipe Production”

〇A one-off turn down using a convenient production kit for the root mouthpiece. By making the exhaust pipe line slope downwards, it creates the feeling of a B-class chopper with a raised belly.

---

【Step】

“Mid-High Control Parkerized for SR400/500“

〇A step kit that is indispensable for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

---

【Seat】

◯The irregular pattern cobra seat is one-off. It is designed to absorb shocks with the spring working properly.

---

【Electrical Equipment】

“Battery Lesser“

〇This is a battery-less kit made entirely in Japan.

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even with LED turn signals. It can also be used as a replacement for the original relay.

“Custom Ignition Switch Weld On Kit General Purpose“

〇The main key, originally located on the top bridge, is easy to operate even while riding and is welded to the lower left of the seat.

---

【Gas Tank Installation】

◯ The gas tank is a peanut. The paint pattern, which looks like a foreigner did it half-heartedly, and the aging process that is not overdone to the point of being a hidden flavor, is made by “BACON“.

“Welding nut non-through M8 2p“

〇 Drill a hole in the gas tank body and insert it for welding. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇 Used for the rear installation of the gas tank. This one also has an enlarged hole diameter and is used with a rubber mount.

---

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Hardtail】

『“Rigid Line” Bolt-On Hardtail Kit』(5cm Long)

〇As the name suggests, it’s a detachable hardtail kit using bolts/nuts. It remodels the seat rail of the original frame to a rigid line. You can revert to the swing arm/rear shock specification when you go for vehicle inspection or when you want to change the style.

---

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear“

〇A kit that gives a powerful look with the same size as a typical Harley. The tires are FIRESTONE’s A, N, S.

“Drilled plate torque rod SR400/500“

〇This is a drilled design torque rod to avoid interference with the wider tires.

---

【Tail Lamp】

『Lucas Large Tail Aluminum Number Base Set General Purpose』

〇A Lucas tail lamp that is easy to install with a base plate included.

---

【Rear Fender】

◯In keeping with the atmosphere of the time, the flat fender is slightly raised and long. The Lucas tail and number plate are also arranged on the right side.

---

【Sissy Bar】

◯ I restrained myself from doing what I wanted to do and made a simple sissy bar. It’s for the overall atmosphere. I assembled it in a shape that makes it easy to tie up luggage.

---

【Rear Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“Weld tab S size 4.5mm thick steel 2p“

〇Welded onto a hardtail. Used as a blinker base.

---

【Drive System】

『Rear sprocket SR400/500 428-56 』

〇An affordable and durable replacement sprocket.