FrontHandlebars, F forks, headlights, etc.

【Front Wheel】

“SR400/500 21inch kit for front“

〇A wheel kit that results in a narrow, large-diameter, sharp style.

【Front Fork】

“2%er 10cm long Joints for Front Fork (pair) [SR400/500]“

〇A front fork extended by 10cm. The fork bottom case is finished with smoothing & polish.

【Headlight】

“Unity Replica Headlight“

◯ The vintage look remains the same as it was, and the light bulb is a reliable H4 specification.

【Handle/Handle Area】

◯The Z bar handle is custom-made to fit the owner’s physique.

“SR400/500 Handlepost Offset Collar“

◯The installation width is widened for a balanced attachment.

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1100mm ’88~’08“

“Clutch Wire 100mm Long“

〇We use long cables for the simple throttle.

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever“

〇 A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)

【Front Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“

“Diamond Blinker Stay“

◯The blinker is attached to the bottom of the frame.

【Speedometer】

“Mechanical speedometer φ48mm [No trip 1:4] General purpose #General-purpose parts“

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off pipe production exhaust flange set for SR“

〇A one-off drag pipe using a convenient mouthpiece set.

Similar products are here↓

“Torque cone drag pipe muffler SR400/500“

【Step/Shift】

『Mid-High Jockey Shift Kit Chrome for SR400/500』

〇Maintaining the comfortable riding posture of the mid-high step, this is a jockey shift kit that focuses on operation feel such as touch and stroke.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit“

〇Your slow SR will dramatically change. It’s a carburetor that’s easy to handle with sharp and smooth acceleration.

“SR400/500 FCR 39φ carburetor mounting adapter set“

〇It’s a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

“Net funnel set for FCR carburetor“

〇It’s a set of a stainless steel trash guard net and an aluminum funnel, changed from the plastic red funnel.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit that is made entirely in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, it is welded and installed under the left side of the seat.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

“280mm G-Suspension”

〇A rear shock that is about 4cm down on a swing arm extended by 5cm. It moves well among low-down suspensions.

【Rear Fender】

“5-Inch Custom Rib Fender – Steel Material“

“Reinforcement Back Plate for 5-Inch Rib Fender“

〇A thick and durable rib fender. A reinforcement plate is added around the mounting hole to mount it even more robustly.

【Rear Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.