FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“Fork boots, general-purpose”

〇Classic universal fork boots.

---

【Front Fender】

“Vintage front fender brace stainless steel for SR400/SR500”

◯ A fender stay made by hand-bending stainless steel for a normal front fender. It gives a classical, old car-like atmosphere.

“SR400/500 Front fender upper stay”

〇 A plate to lift and attach the fender when using tires with height (height).

---

【Front Wheel】

“Pirelli MT53 Replica 4.00-18”

〇A replica of the 70s Pirelli. It suits all styles, from street to tracker, scrambler, bobber, chopper, etc.

---

【Headlight】

“7 inch Lucas type headlight case chrome”

“British Lucas Genuine Headlight Lens”

◯A unique spherical lens with a roundness. It has become a hard-to-find part, but the highly rounded Lucas lens is the best for this style.

---

【Handle/Handle Area】

“Amal type throttle holder, general purpose (for 7/8″)”

“Chopper Grip Black 22.2mm 7/8inch”

“Amal type slot wire 1200mm ’88~’08”

“Brake Wire 200mm Long”

“Clutch Wire 100mm Long”

〇We are using long cables with a simple throttle.

---

“Handle Lock Weld On Kit”

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever”

〇 A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)

---

【Front Blinker】

◯A large blinker of the XS-1 type.

---

【Speedometer】

“Smith style speedometer 80mm 1:4”

“Smith style tachometer 80mm”

◯The dual meter is a slightly larger 80 pie.

“Smith Style Meter Stay Type 1”

〇Flat meter stay dedicated to Smith meter.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off Pipe Manufacturing Exhaust Pipe Flange Set”

〇Using a convenient manufacturing kit for the root mouthpiece, one-off production is done. The root is hand-bent, and a TOGA-made Triumph muffler is used for the leg guard for British cars. To bring it inside, we have created an escape in the frame and rear shock part.

---

【Seat】

“Bates TT type seat SR400/500”

〇A seat that can be selected from 7 types. The American old racer type seat suits well with the US style cafe.

---

【Electrical Equipment】

“IC blinker relay wide range specification”

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

---

【Gasoline Tank Installation】

“Triumph tank (fabrication material)”

◯The gasoline tank is modified and installed for Triumph, Bonneville.

“Welding nut non-through M8 2p”

〇Drill a hole in the gasoline tank body, insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p”

〇Enlarge the hole diameter, change to rubber mount specification, and hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p”

〇Used for the rear installation of the gas tank. This also enlarges the hole diameter and uses it as a rubber mount.

---

【Side Cover】

“STD side cover SR400/500”

◯It’s a classical side cover with a round shape.

---

【Engine Area】

“Breather filter SR400/500”

〇This is a filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19”

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

◯The covered type rear shock is made by Daytona. It will be lowered by 2 cm.

Similar products are here↓

“Half Cover for Classical Rear Shock SR400/500”

---

【Rear Tire】

“Pirelli MT53 Replica 4.00-18”

〇A replica of the 70s Pirelli. It suits all styles, from street to tracker, scrambler, bobber, chopper, and more.

---

【Rear Fender】

◯ Mounted a normal fender on the rear frame that has been loop processed. Added a hand-bent BSA type fender stay made of stainless steel.

---

【Rear Subframe】

“Loop Frame for SR400/500 and Others”

〇This is a steel pipe for processing the rear loop frame.

---

【Rear Blinker】

◯Large round tail, the blinker is an XS-1 replica.

---

【Drive System】

“Rear sprocket SR400/500 428-56”

〇A durable sprocket made of steel.

“O-ring chain 428-130L”

〇A replacement drive chain with built-in O-rings.