FrontHandlebars, F forks, headlights, etc.

• With 19-inch wheels, ALLSTATE Dirtman tires, and a 4cm lowered front fork, we’ve created a compact yet intense feel with a rough atmosphere.

【Headlight】

“Universal Mini Square Light” (Discontinued)

Similar products are here↓

“H3 Mini Square Headlight Glass Lens“

【Handle/Handle Area】

◯One-off handle. We mixed the style of a racer and a chopper, and added a 2%ER flavor.

“SR400/500 Handlepost Offset Collar“

◯With the handle post offset collar, we brought the dog bone riser inward, and left the welded handle set as is after heating and bending. Although the handle-to-seat width tends to be narrow in the bobber style SR, thanks to the forward dog bone, it has become a comfortable position.

【Speedometer】

『Mechanical Speedometer 60mm Black Panel 1:4』

『Universal Speedometer Stay』

〇Mounted on the left front side of the gasoline tank, which is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

【Electrical】

“Battery Lesser“

〇This is a battery-less kit made entirely in Japan.

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Originally attached to the top bridge, the main key is easy to operate even while riding, and is welded to the lower right of the seat.

【Gas Tank Installation】

◯ The gas tank is a modified Yamaha mini trail, mounted with a safe 3-point rubber mount. The mini trail tank is often deeply fitted to the SR400/500, but for this vehicle, it was slightly raised at the front to create a light atmosphere.

◯ The oil filter cover features an iron cross ornament from “STUDIO FREE“. It’s easy to install by just sticking it on, giving the vehicle a bad-boy finish.

“Welding nut non-through M8 2p“

〇 Drill a hole in the gas tank body and insert it for welding. It’s non-penetrating, so it won’t leak. Used on the front side.

“Weld tab M size 4.5mm thickness 2p“

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut.

“Weld tab L size 4.5mm thick steel 2p“

〇 Used for the rear mounting of the gas tank. This also enlarges the hole diameter and uses it with a rubber mount.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

• At 2%ER, we were responsible for installing flat fenders as a countermeasure for side numbers, and for the one-off production of a rough sissy bar that seemed to lack motivation.

【Rear Wheel】

◯The rear wheel is a hot rod standard 15 inches. It can be made to the same specifications with a custom spoke on the Virago 250 rim.

【Tail Lamp】

◯The tail lamp you brought in was installed.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.