#155 SR400Custom Report

A street cafe racer made by combining original parts and one-off parts. Based on the classic style, it’s a unique chop cafe that doesn’t overlap with others, mixing street style with a one-off split gas tank, high tires, solo seat/pillion pad, and lowdown.

The aged paint with a unique texture was requested from ” BACON DECRATHION “.


( Blog post in progress is here )


The provided text does not contain any Japanese content to translate.


◎『Check out other 2%ER’s custom SR400/500 without frame modifications here

Custom List

FrontHandlebars, F forks, headlights, etc.

Front Fender

2%er Short Front Fender STD [SR400/500]

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.

SR400/500 Front fender upper stay

〇A plate to lift and attach the fender when using tires with height (height).


Front Tire

LOADSTAR TIRE 4.00-18

◯A classic watermelon pattern, high vintage style tire.


Headlight

7 inch Lucas type headlight case chrome

British Lucas Genuine Headlight Lens

◯We have combined a unique roundness and lens cut to create a lens with a unique atmosphere. It’s a classic setup for a traditional cafe racer.


Handle/Handle Area

” Ace Bar Type2 SR/XS650 35Ф CHUCK BOX

◯The most robust and best-designed separate handle that best suits the 60’s rocker style.

Pipework Light Stay Type 1

◯High-quality pipe work light stay.

Amal type throttle holder, general purpose (for 7/8″)

◯The controls are kept simple with mini switches and the like.


Handle Lock Weld On Kit

● Attached to the less noticeable and easy-to-operate lower part of the stem.


MOTOR ROCK Decompression lever

A decompression lever directly attached to the engine to simplify the area around the handle.


Front Blinker

Small Bullet Turn Signal Matte Black 4pcs SET General Purpose

〇A classic among classics. A chopper-style blinker.

SR400/500 Bottom Mount narrow blinker stay

〇A stay to attach a 10mm blinker to the frame bottom.


Speedometer

Inside meter kit for drum brake SR400/500 #2%er Original #SR400/500


CenterTank, oil tank, seat, step, muffler etc.

• The gasoline tank, which is the face of the bike, has been made unique. We modified the original normal tank into a split gasoline tank, connected it with a drilled plate, and finished it with aging paint.


Muffler

Slip-On Trumpet Muffler for SR400/500

〇We launched this muffler, insisting on domestic production because there were no trumpet mufflers with high quality. It has a good sound.


Carburetor

FCR carburetor 39φ SR400/500 single unit

〇The slow SR’s performance will drastically change. It’s a carburetor that is easy to handle, with sharp and smooth acceleration and good startability.

“Manifold Kit for FCR39φ”

〇It is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.


Seat

The solo/pillion seat is a deadstock made by Dixie. Its slender form, longer than a regular solo seat, suits the SR’s normal frame well. ( Currently under development from the seat base due to difficulty in obtaining )


Electrical Equipment

〇An electrical box, made from a fire extinguisher, has been installed under the seat.

IC blinker relay wide range specification

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.

Battery Lesser

〇This is a battery-less kit that is made entirely in Japan.


Engine Area

Breather filter SR400/500

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    • The rear area is designed in a lowered and condensed street style.


    Rear Wheel

    LOADSTAR TIRE 4.50-18

    〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.


    Rear Fender

    2%er Rear STD Short Fender [SR400/500]

    〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.


    Rear Shock

    “280mm G-Suspension/Chrome”

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)


    Tail Lamp

    Old Spalt Taillight Polish

    〇The tail lamp is a classic and high-quality tail lamp. (This vehicle has been changed to a hard-to-obtain die-cut lens)


    Rear Blinker

    “Small Bullet Blinker/Black”

    〇A classic among classics. A chopper-style blinker.

    “Rear Bottom Mount Blinker Stay”

    〇A stay to attach the blinker to the swing arm.


    Drive System

    Rear sprocket SR400/500 428-56

    〇A durable sprocket made of steel.

    O-ring chain 428-130L

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.