Follow 2%er
Home » #210 SR400

#210 SR400

Custom Bike

#210 SR400Custom Report

This is a SR400 custom of the “B Class Chopper Complete” ordered from Toyama Prefecture, including the base vehicle. It’s a chopper style that recreates the old-fashioned long fork style with the SR400, featuring easy handling in the city despite the long fork, a comfortable riding position and cushioning, easy loading of luggage such as camping gear, and stability on highways. The tasteful aging paint applied to the Sportster tank was requested from “BACON”, which receives orders from all over the world. This custom model has discarded the standard “Front Iron Fender” and “Rear Iron Fender” that come standard with the complete specification, and in addition to the standard “15cm Fork Joint”, it has added the “15cm Long Inner Tube” and “Mid High Step Kit”.

【Here is the STD Chopper complete sample vehicle】

(This is a B-class Chopper complete sample vehicle）

 

(Here are many order examples）

【Detailed Introduction Video of Each Part】

Cookie consent is required to display this video.

【Driving Video】

Cookie consent is required to display this video.

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

Custom List

FrontHandlebars, F forks, headlights, etc.

• The front fork has been lengthened in line with the launch of the B-class chopper style. The tires are a rounded 3.00 size. With this tire selection, the long fork does not become too heavy and results in straightforward handling.

【Front Fork Area】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]” (For use without valve)

〇High-quality stainless steel fork joint.

“SR400/500 15cm long inner tube kit“

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]“

〇A stabilizer that is extremely effective in correcting the handling that tends to lag one beat behind with the extended fork.

“Welding Side Stand Extension Plate”

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]“

〇You can stick it on a normal drum brake to change to a classical style.

【Front Tire】

“SHINKO flute 3.00-18”

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a roundness of 3.00.

【Headlight】

“5.75 inch Bates Light Chrome General Purpose“

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

“SR Bottom Mount Light Stay“

〇A classic headlight that fits well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.

【Handle/Handle Area】

“Pullback Handle”

“Flanders Replica 4 Inch Handle Post”

◯The handlebar is a pullback handle, which is slightly raised with a riser to fit the tall owner.

“Chopper Grip”

“Amal type throttle holder, general purpose (for 7/8″)“

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

(It is installed with modifications on different model years and small headlights)

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style turn signal.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm turn signal to the bottom of the frame.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, which is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

• The gasoline tank is of the Sportster type. The single-color paint with a moderate aging finish is by the patina painter ‘BACON‘.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.

【Seat】

“Old School Double Seat”

○ It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.

【Muffler】

“Down Fish Tail Muffler“

◯This muffler is characterized by a line that appears to rise towards the belly, typical of a B-class chopper. At the owner’s request, we have added drilled processing to the fish part at the end.

【Electrical Equipment】

『Brat Style Electrical Equipment Plate』

〇The area under the seat is finished in a hollow style by removing the air cleaner box. The “electrical equipment plate” is used to organize all electrical components.

【Engine Area】

“2%er Fin Tappet Cover (a pair)[SR400/500]“

◯ A tappet cover with heat-dissipating fins, featuring a rib design as an accent.

【Kick Pedal】

“Bicycle Kick Pedal/White“

    • RearFenders, rear shocks, swingarms, etc.

    【Rear Shock】

    “280mm G-Suspension”

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions.

    【Sissy Bar】

    “Hole Type Sissy Bar/Long”

    〇A design with a hole in the old school side plate. It’s a design that makes it easy to hang hooks.

    【Tail Lamp】

    “Tombstone taillight“

    ◯ A classic of the old school, with a number light function.

    【Rear Blinker】

    『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

    〇A classic among classics. A chopper-style blinker.

    ※Parts Reference may show similar products or products with additional processing.