FrontHandlebars, F forks, headlights, etc.

•The front area has a clean, classic impression due to the compactness of the headlights, speedometer, turn signals, handlebars, etc.

【Front Fork】

“Fork boots, general-purpose“

【Headlight】

“5.75 inch Bates Light Black General Purpose“

◯The hole for the wiring on the back is enlarged, and all the wiring around the handle and the ignition switch, and all the couplers are stored, so it is easy to maintain.

“SR Bottom Mount Light Stay“

〇A standard headlight, light stay.

‘5.75 inch headlight lens yellow [glass]‘

◯A classical yellow lens.

【Handle, Around the Handle】

“Street Low Handle Black“

“Amal type throttle holder, general purpose (for 7/8″)“

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

(Modified to fit different model years and small headlights)

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

【Front Tire】

【LOADSTAR TIRE 4.00-18】

A classic tire. (It’s different from the one on the vehicle, but it’s the same pattern and size)

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

〇A standard small meter. It comes with a trip meter.

【Turn Signal】

“Small Bullet Turn Signal/Black”

〇A staple among staples. A chopper-style turn signal. It was installed under the gas tank with a mount stay exclusive for complete vehicles.

CenterTank, oil tank, seat, step, muffler etc.

•The original well-shaped gasoline tank is left as is, with the overall vehicle body arranged to have a natural compactness. The tasteful paint job is done by “BACON“.

【Muffler】

◯The muffler is a simple straight pipe.

“Low Pass Baffle”

◯Inside, it is equipped with a sound volume inner silencer for torque up, the “Low Pass Baffle”.

【Seat】

“Old School Double Seat”

○ It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.

【Electrical Equipment】

『Brat Style Electrical Equipment Plate』

〇A simple electrical equipment plate that makes it easy to organize harnesses and electrical components.

【Carburetor】

◯Instead of the air cleaner, we installed an “aluminum funnel with a net”, and after setting the carburetor, we handed it over to the owner.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

“280mm G-Suspension/Black”

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions.

【Rear Fender】

『2%er Rear STD Short Fender [SR400/500]』

〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.

【Rear Tire】

“LOADSTAR TIRE 4.50-18“

〇A classic vintage style watermelon pattern. It’s a tall, voluminous rear tire. (It’s different from the one on the vehicle, but it’s the same pattern and size)

【Tail Lamp】

“Mini Crocker Tail Light Polish“

【Rear Blinker】

“Small Bullet Blinker/Black”

〇A classic among classics. A blinker in the chopper style.