FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇High-quality stainless steel fork joint.

“Fork boots, general-purpose“

【Headlight】

“5.75 inch Bates Light Chrome General Purpose“

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

“Bottom Mount Light Stay II“

〇A headlight stay that fits well with the chopper style due to its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Handle/Handle Area】

“One-off Z-Bar”

“CRAZY” Ripple Pipe with 22.2mm Taper (7/8-inch)“

◯The handle is a one-off Z-Bar (robot handle). The pipe that serves as an accent is the “CRAZY” Ripple Pipe with 22.2mm Taper (7/8-inch)“.

“Amal type throttle holder, general purpose (for 7/8″)“

◯The handle area, controls, meter, and ignition-related parts are all cleanly processed, a standard of 2%ER.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

(Different model years, installed with modifications on small headlights)

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style turn signal.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach an M10 millimeter turn signal to the frame bottom.

CenterTank, oil tank, seat, step, muffler etc.

•A sticker of your choice for the genuine gasoline tank.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and significantly reduces fatigue.

【Seat】

“Old School Double Seat”

○ It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a design that looks stylish despite the thick urethane.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit“

〇This carburetor provides sharp and smooth acceleration, making it easy to handle. It makes a well-tuned 500cc engine even more enjoyable.

“Manifold Kit for FCR39φ”

〇This is a dedicated adapter for firmly attaching the FCR carburetor to the SR400/500.

【Muffler】

“Down Fish Tail Muffler“

◯This muffler is characterized by a line that appears to rise towards the belly, typical of a B-class chopper. At the owner’s request, we have added drilled processing to the fish part at the end.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

◯ The rear area is lowered with a 280mm rear shock. (The actual vehicle uses a different manufacturer, but normally 2%ER uses the “280mm G-Suspension”)

“280mm G-Suspension”

〇 A rear shock that lowers by about 4cm. It moves well among the lowered suspensions.

【Sissy Bar】

“SR400/500 Sissy Bar Plate Hole Type Single Unit“

〇An old-school design with perforated side plates. The design makes it easy to hang hooks.

【Tail Lamp】

“Vintage Lucas type tail lamp“

◯ It’s a replica of the 60’s style with a rooster-like visor.

【Rear Blinker】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style blinker.

SR400/500 Rear Bottom Mount Winker Stay

〇A stay to attach the blinker to the swing arm.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.