FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“75mm Fork Joint”

〇A high-quality stainless steel joint made in Japan.

---

【Headlight】

『SR400/500 Sports Star Type Headlight Kit ~02′ Bolt On』

〇A relatively large body headlight kit that can accommodate many harnesses and couplers and is easy to handle.

---

【Handle/Handle Area】

“Upriser Bar Handle“

◯A handle that is easy to ride in the 60’s style.

“PAUGHCO type 3inch Square Riser SR400/500“

◯The riser is slightly raised and set in a position that is easy to operate and well balanced.

“Chopper Grip Black 22.2mm 7/8inch“

“Amal type throttle holder, general purpose (for 7/8″)“

◯The handle area is a standard clean treatment of 2%ER.

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

(It is installed with modifications for different model years and small headlights)

---

“Handle Lock Weld On Kit“

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle.

---

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style turn signal.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm turn signal to the bottom of the frame.

---

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, where it is inconspicuous and highly visible.

---

【Front Wheel】

“19-inch Mini Drum Brake Wheel”

〇An extremely simple chopper part. It is a modified and reused part for Harley.

CenterTank, oil tank, seat, step, muffler etc.

• A Sportster type gas tank securely attached with four-point rubber mounts.

---

【Muffler】

“Slip-On Trumpet Muffler”

〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.

---

【Seat】

“Old School Double Seat II”

〇A seat that you can select from 7 types. It’s a comfortable seat with a vintage design of cross-stitch and button-down.

---

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.

---

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“Battery Lesser“

〇This is a battery-less kit that is made entirely in Japan.

---

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

Under the seat, we have installed a “Brat Style Electrical Plate” to organize the surrounding harnesses and electrical components.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

“280mm G-Suspension/Chrome”

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

---

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear“

〇This is a kit that gives a powerful look with the same size as a typical Harley.

“Drilled plate torque rod SR400/500“

〇This is a drilled design torque rod to avoid interference with the wider tires.

---

【Rear Fender/Tail Lamp】

“Rear Iron Fender“

◯A combination of the rear fender, which was launched as a replica of the Shovel Sportster era, and the DUO tail lamp.

---

【Turn Signal】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style turn signal.

『Rear Bottom Mount Turn Signal Stay』

〇A stay to attach the turn signal to the swing arm.