#247 SR400Custom Report
This is an STD Street Complete ordered from Nara Prefecture. With a parts selection almost identical to the sample car, we added options such as the FCR carburetor, mid-high step kit, and additional paint for the gasoline tank. We finished it with all original bolt-on parts, creating a simple street style with a strong presence that takes advantage of the SR’s strengths.
“Click here for other 2%ER street bobber custom samples”
【Detailed Introduction Video】

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』
Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fender】
“2%er Short Front Fender STD [SR400/500]“
〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.
“SR400/500 Front fender upper stay“
〇A plate to lift and attach the fender when using tires with height (height).
【Front Tire】
〇A classic watermelon pattern, a vintage style tire with height.
【Headlight】
“5.75 inch Bates Light Chrome General Purpose4.5-inch Bates Light Chrome General Purpose“
〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.
【Handle/Handle Area】
“Diamond Grip Black 22.2mm 7/8“
“Amal type throttle holder, general purpose (for 7/8″)“
“Amal type slot wire 900mm ’88~’08“
“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“
“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“
The handle is a Street Rover with a natural curve compared to the original. We use long cables for the simple throttle.
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇A mini turn signal switch that is easy to install with a coupler on
(It is installed with modifications on different model years and small headlights)
“MOTOR ROCK Decompression lever“
A decompression lever directly attached to the engine to simplify the area around the handle.
【Front Blinker】
“Micro Blinker” (Discontinued ⇒ Now changed to Star Bean Blinkers, Set of 2, Black)
“SR400/500 Stem Mount Winker Stay A Type“
〇The Micro Blinker is attached under the stem.
【Speedometer】
“Mechanical Speedometer 60mm Black Panel 1:4“
〇A standard small meter. It comes with a trip meter.
CenterTank, oil tank, seat, step, muffler etc.
●The gasoline tank, usually painted in your favorite color, has been added with a scallop design of deep green and silver lines on a black base. The outstandingly comfortable and cool mid-high step, and the FCR carburetor that drastically changes the ride, have been added as options. The selectable seats and mufflers, etc., are also customized to the owner’s preference.
【Muffler】
“Slip-On Megaphone Muffler for SR400/500“
〇A reverse cone muffler that is slip-on mounted on a normal exhaust pipe. It is one of the most prominent deep bass sounds among many aftermarket mufflers.
【Step】
“Mid-High Control Parkerized for SR400/500“
〇This step kit is indispensable for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.
【Seat】
“Slim Double Sheet Bates Type Tuck Roll for SR400/500“
You have chosen a slim and simple tuck roll seat, which can be selected from seven types.
【Carburetor】
“FCR carburetor 39φ SR400/500 single unit“
〇Your slow SR will dramatically change. It’s a carburetor that’s easy to handle with sharp and smooth acceleration.
〇It’s a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.
“Funnel net for FCR carburetor“
〇A stainless steel trash prevention net.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
“IC blinker relay wide range specification“
〇A wide-range turn signal relay that can handle 1-150 watts without any difficulty, even for LED turn signals. It can also be used as a replacement for the original relay.
〇This is a battery-less kit that we manufacture in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
【Rear Shock】
『280mm Low Down Suspension】G-SUSPENSION280【Black】General-purpose』
〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Rear Fender】
『2%er Rear STD Short Fender [SR400/500]』
〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.
【Rear Tire】
〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.
【Tail Lamp】
『Mini Crocker Tail Light Polish』
〇A small tail lamp with a design full of vintage feel.
【Rear Blinker】
“Micro Blinker” (Discontinued ⇒ Now changed to Star Bean Blinkers, Set of 2, Black)
“Universal Blinker Stay 8A Type Steel”
〇It is installed near the end of the rear frame with a super small micro blinker.
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.