Home » #314 SR400

#314 SR400

2024.7.12

Custom Bike

#314 SR400Custom Report

A long fork style SR400 built entirely with bolt-on parts.

The owner’s request was for a “worn-out chopper”. Each part was overhauled due to age-related deterioration, and the bike was fully serviced and assembled,

It was built entirely with original bolt-on parts on a standard frame.

●Orthodox yet well-balanced coolness

●All bolt-on production, so it can be returned to original at any time

●Finished in a reasonable price range compared to full custom bikes from the frame

●Quick delivery with all bolt-on parts

●Operability such as step position and handling lightness that is not tiring even for long distances

We have carefully crafted it with these commitments.

Compared to modified frame vehicles, the bolt-on chopper custom is a major point as it can significantly ease the vehicle inspection process.

■About Vehicle Inspection

.Muffler replacement or core filling

.F turn signal position change (not wide enough)

.Addition of left mirror

.Addition of reflector

.Addition of tandem belt

You can clear the vehicle inspection with the above light work.

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

Custom List

FrontHandlebars, F forks, headlights, etc.

●Despite the 35cm extended long fork, the selection of small-diameter tires with roundness provides a light handling around the front that you wouldn’t expect from a long fork.

The smallest HS type headlight that can store a lot of harnesses and couplers significantly reduces the time-consuming harness processing work and organizes the wiring.

【Front Fork Area】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]” ¥19,580 (tax included)

〇High-quality stainless steel fork joint.

“20cm Long Inner Tube” ¥68,200 (tax included)

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]” ¥19,250 (tax included)

〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind the extended fork.

“Fork boots, general-purpose” ¥3,080 (tax included)

〇Classic universal fork boots

“Welding Side Stand Extension Plate” ¥3,520 (tax included)

〇A plate to extend the side stand that leans too much when the fork is extended. Welding is required.

【Headlight】

“5.75 inch Bates Light HS Type Chrome” ¥11,550 tax included

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II” ¥2,640 tax included

〇A headlight stay that suits the chopper style well with its moderate height and protrusion.

【Turn Signal】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,700 tax included

〇A classic among classics. A chopper-style turn signal.

“SR400/500 Bottom Mount narrow blinker stay” ¥6,380 tax included

〇A stay to attach a 10mm turn signal to the bottom of the frame.

【Handle/Handle Area】

“STD Robot Handle 7/8 inch 22.2mm” ¥24,200 tax included

〇Commonly called a robot handle, it’s a chopper handle.

“PAUGHCO type 3inch Square Riser SR400/500” ¥30,580 tax included

〇Preserving the atmosphere of the time, it’s a very easy-to-use handle post.

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,598 tax included

“Amal type slot wire 1100mm ’88~’08” ¥3,025 tax included

“600mm Long Brake Cable” ¥5,280 tax included

“200mm Long Clutch Cable” ¥2,200 tax included

“Chrome Cross Mirror” ¥5,940 tax included

〇Iron cross design, a chopper-like design clamp mirror.

【Front Wheel】

“SHINKO flute 3.00-18” ¥14,080 including tax

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥6,347 tax included

〇Easy to install mini turn signal switch with coupler on

“MOTOR ROCK Decompression lever” ¥4,950 tax included

〇 A decompression lever directly attached to the engine to simplify the handle area.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4” ¥9,240 tax included

“Extension meter cable joint” + “Extension meter cable joint” ¥2,090 tax included ×2

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

●Adopting a classic semi-up muffler and a comfortable seat with an old-school design.

With the mid-high position that allows for weight distribution, you will have an outstanding comfort and a cool riding posture, making it less tiring even for long-distance runs.

【Muffler】

“Semi-Up Drag Pipe Muffler” ￥31000 (excluding tax)

〇Up muffler for slip-on installation on normal exhaust pipes.

“Muffler Bandage Black” ￥2,420 including tax

〇Mainly used for heat insulation by wrapping around the exhaust pipe

【Seat】

“Old School Double Seat” ¥41000 (excluding tax)

○ This is a standard seat for 2%ER’s normal frame custom, featuring a button-down design that is difficult to express in mass-produced items, and a thick urethane design that looks stylish.

【Step】

“Drilled Mid-High Step Kit/Parka Rise“　￥62500 (excluding tax)

〇A cool riding posture, a position that is extremely less tiring, this step kit is indispensable for 2%ER’s custom, it’s a new product with a drilled design.

【Electrical Equipment】

“New Electrical Equipment Plate” (Coming Soon)

〇You can make the area under the seat of carburetor models up to 2008 completely empty.

“BT Type Custom Ignition Switch Bolt-On Kit”

〇A custom main key that can also be used on vehicles equipped with a battery.

“IC blinker relay wide range specification”

〇A wide-range turn signal relay that can easily be used with LED turn signals and supports 1-150 watts. It can also be used as a replacement for the original relay.

“Battery Lesser” ¥3,400 (excluding tax)