#319 SR400
Custom Bike

#319 SR400Custom Report
# SR400 Custom Report
An SR400 made entirely with bolt-on parts, without any frame modifications. It’s a custom design inspired by the standard style of British bikes like Triumph, featuring block-like front and rear tires, a left-out up-muffler, and the image of a street custom/scrambler that seems to have been running on unpaved roads at the time.
◎”Check out other 2%ER’s custom SR400/500 without frame modifications here“
Custom List
FrontHandlebars, F forks, headlights, etc.
●The front area replicates a street custom style from the 60’s with an upright handlebar without extending the fork of that time. The fender has been changed to a STD short fender that suits any style.
【Headlight】
“5.75 inch Old Bates Type Side Mount Headlight #5.75 inch headlight #General-purpose parts” ¥8,640
〇Vintage style side mount headlight. H4
“Old Bates Type Side Mount Light Stay SR400/500, XS650 #5.75 inch headlight #2%er Original #SR400/500 #XS650” ¥5,500
〇Headlight stay molded from vintage
【Handle/Handle Area】
“Upriser Bar Handle” ¥10,000
◯A handle that focuses on ease of riding in the 60’s style.
“Amal type throttle holder, general purpose (for 7/8″)” ¥4,180
“Trail Enduro Grip” ¥1,300
Amal type slot wire 1000mm ’88~’08 ¥2,750
“200mm Long Brake Cable” ¥2,000
“200mm Long Clutch Cable” ¥2,000
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”¥3,950
〇Easy to install mini turn signal switch with coupler on
(For different model years, it is installed with modifications to small headlights)
“Handle Lock Weld On Kit” ¥4,200
〇It is newly installed by welding at the lower part of the stem, which is inconspicuous and easy to operate.
“MOTOR ROCK Decompression lever” ¥4,500
〇A decompression lever directly attached to the engine to simplify the handle area.
【Speedometer】
“Mechanical Speedometer 60mm Black Panel 1:4” ¥8,400
〇A classic small meter. Comes with a trip function.
【Front Blinker】
“Small Bullet Blinker/Chrome”¥7,000
〇A classic small bullet blinker, black. It is a 10mm mount.
“SR400/500 Bottom Mount narrow blinker stay“¥5,800
〇A stay to mount a 10mm blinker to the bottom of the frame.
【Front Wheel】
“2%er Short Front Fender STD [SR400/500]” ¥12,500
〇A short fender that suits any style. It is made of FRP but has a design with ribs around the perimeter like the original.
“SR400/500 Front fender upper stay” ¥3,500
〇A plate to lift and attach the fender when using a tire with height (height).
“Pirelli MT53 Replica 4.00-18” ¥15,600
〇A replica of the 70’s Pirelli. It suits all styles from street to tracker, scrambler, bobber, chopper, etc.
“Fork boots, general-purpose” ¥2,800
〇Classic universal fork boots.
CenterTank, oil tank, seat, step, muffler etc.
● The vehicle body and exterior finished with the bare minimum bolt-on parts.
“Drilled Mid High Step Kit / Parkerize” ¥62,500
〇A cool riding posture, a position that is extremely less tiring, this new product of drilled design step kit is indispensable for 2%ER’s custom.
【Muffler】
“Left Up Trumpet Muffler Set SR400/500” ¥64,000
〇A full exhaust muffler equipped with a torque cone that we developed independently in the mouthpiece.
“Muffler Bandage Black” ¥2,200
〇Heat-resistant bandage to prevent burns.
【Seat】
“Bates TT Type Seat”¥41,000
〇A vintage BATES seat replica that also focuses on comfort.
【Electrical Equipment】
“2%ER New Electrical Plate” (Coming Soon) Price Undecided
“IC blinker relay wide range specification” ¥2,400
〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.
“Battery Lesser” ¥3,400
〇This is a battery-less kit that is made entirely in Japan.
“FCR carburetor 39φ SR400/500 single unit” ¥77,000
〇Your slow SR will be dramatically transformed. This is a carburetor that is easy to handle with sharp and smooth acceleration.
“Funnel Net for FCR Carburetor” ¥3,900
〇This is a set of stainless steel trash prevention nets that are sandwiched between the body and the funnel.
“Manifold Kit for FCR39φ” ¥12,000
〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.
【Engine Area】
“AIS Cancel Plate” ¥1,500
〇A cancel plate made of stainless steel. It can also be used by inserting it without removing the AIS body.
“Breather filter SR400/500” ¥3,500
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19” ¥2000
〇A durable replacement sprocket made of steel
RearFenders, rear shocks, swingarms, etc.
● The rear area, which exudes a sense of lightness, uses classic parts such as rear fenders, tires, and sissy bars.
【Rear Shock】
“280mm G-Suspension/Chrome” ¥28,875
〇Rear shock with about 4cm down. It moves well among the low-down suspensions. (Removal of the original chain case is necessary)
“SR400/500 Round Sissy Bar (Sissy Bar) Bolt-On Kit” ¥36,000
〇A design often seen on old school choppers, well-balanced and recreated to suit the SR400/500’s vehicle size.
【Rear Fender】
“2%er Rear STD Short Fender [SR400/500]” ¥15,000
〇A short fender with ribs around the perimeter like the original, which suits all kinds of designs without any problems.
【Tail Lamp】
“Sparto Tail Lamp/Black”¥12,400
〇A classic simple Sparto tail lamp. It comes in black.
【Rear Tire】
“Pirelli MT53 Replica 4.00-18”¥15,600
〇A replica of the 70s Pirelli. It suits all styles, from street to tracker, scrambler, bobber, chopper, and more.
【Rear Turn Signal】
“Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,000
〇A classic among classics. A chopper-style turn signal.
“Rear Bottom Mount Turn Signal Stay” ¥4,500
〇A stay to attach the turn signal to the swing arm.
“Rear sprocket SR400/500 428-56” ¥4,800
〇A durable sprocket made of steel.
“O-ring chain 428-130L” ¥11,603
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.