#8 SR400

Custom Bike

Custom List

FrontHandlebars, F forks, headlights, etc.

Front Fork

2%er 15cm long Joints for Front Fork (pair) [SR400/500]

〇High-quality stainless steel fork joint.

2%er Tweak Bar (front stabilizer) [SR 400/500]

〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind with extended forks.

Fork boots, general-purpose

〇Classical universal fork boots.


Front Wheel

◯The front wheel is 19 inches.


Headlight

◯The headlight is a “Mirror Corner Light” (discontinued) with two corner lights.


Handle/Handle Area

◯One-off pullback handle.

Amal type throttle holder, general purpose (for 7/8″)

◯Controls are simplified with mini switches and the like.


Handle Lock Weld On Kit

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.


MOTOR ROCK Decompression lever

〇A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)


Front Blinker

Small Bullet Turn Signal Chrome 4pcs SET General Purpose

〇A classic among classics. A chopper-style blinker.

SR400/500 Bottom Mount narrow blinker stay

〇A stay to attach a 10mm blinker to the bottom of the frame.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4

Universal Speedometer Stay

〇Mounted on the left front side of the gasoline tank, which is not easily noticeable and has high visibility.

Extension meter cable joint

〇Used when extending the fork or relocating the meter.


CenterTank, oil tank, seat, step, muffler etc.

Muffler

“One-off Pipe Manufacturing Exhaust Pipe Flange Set”

Fishtail End Tip

〇A one-off fishtail muffler made using a convenient manufacturing kit for the base mouthpiece.


Step

Mid-High Control Parkerized for SR400/500

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.


Seat

◯With a one-off high-back seat, you will have a comfortable riding posture. Especially inside the seat, there is a backrest frame that can bear the entire weight.


Seat Rail

◯ Seat rail processing that lowers the seat straight without bending.


Electrical Equipment

◯ Especially in high-year models, it’s hard to fit electrical equipment, but we’ve neatly organized it under the seat. We plan to make an electrical box.

 ” IC blinker relay wide range specification

〇 A wide-range blinker relay that can handle 1-150 watts without any problem even with LED blinkers. It can also be used as a repro for the original relay.


Gasoline Tank Installation

◯ The gas tank is a one-off peanut. It is safely mounted with three-point rubber.

Welding nut non-through M8 2p

〇 Drill a hole in the gasoline tank body and insert and weld it. It’s non-penetrating, so it won’t leak. Used on both sides.

Weld tab M size 4.5mm thickness 2p

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

Weld tab L size 4.5mm thick steel 2p

〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.


Engine Area

Breather filter SR400/500

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    Rear Wheel

    16″ Kit Steel Spoke SR400/500 Rear

    〇A kit that gives a powerful look with the same size as a typical Harley.

    Drilled plate torque rod SR400/500

    〇A drilled design torque rod to avoid interference with the wider tires.


    Rear Shock

    ◯Lowered with a one-off rigid suspension. The swing arm has been extended by 5cm.


    Sissy Bar

    ◯A one-off sissy bar made with a square bar.


    Rear Fender

    ◯The rear fender is also a one-off production. It’s a tough condition where the body weight is applied on the heavily vibrating SR, and it also serves as a support for the sissy bar, but we have effectively reinforced the backside with suitable materials so that it can be used for a long time.


    Rear Blinker

    Small Bullet Turn Signal Chrome 4pcs SET General Purpose

    〇A classic among classics. A chopper-style blinker.

    Weld tab S size 4.5mm thick steel 2p

    〇Welded onto a hardtail. Used as a blinker base.


    Drive System

    Rear sprocket SR400/500 428-56

    〇An affordable and durable replacement sprocket.

    ※Parts Reference may show similar products or products with additional processing.