#78 SR400Custom Report
This is a vehicle that has been additionally customized based on one of the models of “Original Complete SR” proposed by 2%ER.
[ Options ]
● “2%er Front Wheel Aluminum Hub Cap [SR400/500]”
● “Mid-High Control Parkerized for SR400/500”
● “Harley Type Replica Riser” 2 inches
● “Daytona Side Cover”
Rear frame processing, one-off strut production
———————————————-
“Click here for the article published in THE SR TIMES”
“Click here for the owner’s snapshot page”


Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fork】
〇Classic universal fork boots.
【Front Wheel】
“2%er Front Wheel Aluminum Hub Cap [SR400/500]“
〇You can change to a classical style by sticking it on a normal drum brake.
【Front Tire】
“Pirelli MT53 Replica 4.00-18”
〇A replica of the 70s Pirelli. It suits all styles from street to tracker, scrambler, bobber, chopper, etc.
【Front Fender】
◯We mount the classical press-formed fender with a vintage design fender brace.
【Headlight】
“SR400/500 Sports Star Type Headlight Kit ~02′ Bolt On“
〇A headlight with a visor and a bright H4 bulb. It’s a convenient headlight that can store a lot of wiring in the body.
【Handle/Handle Area】
〇A narrow flat handle with a short clamp section.
“Harley Type Replica Riser 2inch SR400/500“
◯The riser added to the order sets the drag bar handle. It is used with black paint.
“Amal type throttle holder, general purpose (for 7/8″)“
“Amal type slot wire 1100mm ’88~’08“
〇Simple throttle with each long cable is used.
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇A mini turn signal switch that is easy to install with a coupler on.
“MOTOR ROCK Decompression lever“
A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)
【Front Blinker】
“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“
〇A classic among classics. A chopper-style blinker.
【Speedometer】
『Mechanical Speedometer 60mm Black Panel 1:4』
〇Mounted on the left front side of the gasoline tank, which is inconspicuous and has high visibility.
CenterTank, oil tank, seat, step, muffler etc.
【Muffler】
『Slip-On Megaphone Muffler for SR400/500』
〇A megaphone muffler that can be slipped onto a standard exhaust pipe. It stands out for its deep bass sound among the many aftermarket mufflers available.
【Step】
“Mid-High Control Parkerized for SR400/500“
〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and significantly reduces fatigue.
【Seat】
○ It’s a standard seat for 2%ER’s normal frame custom, with features like button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.
【Electrical Equipment】
“IC blinker relay wide range specification“
〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.
〇A battery-less kit that is made entirely in Japan.
【Gasoline Tank Installation】
“Sportster Tank”
◯We add mounting stays to the frame side by welding, and securely and safely install it with four-point rubber mounts.
“Welding nut non-through M8 2p“
〇Drill a hole in the gasoline tank body and weld it in. It’s non-penetrating, so it won’t leak. Used on both sides.
“Weld tab M size 4.5mm thickness 2p“
〇Enlarge the hole diameter and change to rubber mount specification, holding the non-penetrating nut. Used on both sides.
“Weld tab L size 4.5mm thick steel 2p“
〇Used for rear gas tank mounting. This also enlarges the hole diameter and uses it as a rubber mount.
【Engine Area】
〇A filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
• For this vehicle, we added custom modifications such as cutting the rear frame and repurposing the fender strut from the Harley Model K.
【Rear Fender】
◯A rear fender launched as a replica of the Shovel Sportster era. It is made of steel and is sturdily constructed.
【Rear Shock】
〇A rear shock that is about 4cm down. It moves well among low-down suspensions.
【Tail Lamp】
You have selected the DUO Tail.
【Rear Tire】
“Pirelli MT53 Replica 4.00-18”
〇A replica of the 70s Pirelli. It suits all styles, from street to tracker, scrambler, bobber, chopper, etc.
【Rear Blinker】
『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』
〇A classic among classics. A chopper-style blinker.
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.