#73 SR400

Custom Bike

#73 SR400Custom Report

This is a vehicle that has been additionally customized based on one of the “Original Complete SR” proposed by 2%ER.

The front wheel has been changed to 19 inches and the “Starburst Hub Cap” has been installed, and the “Rear Wheel has been changed to 16 inches”.

With the installation of the “Paughco Type 3 Inch Riser” which has a high-quality feel and raises the position, and the convenient “Sissy Bar Middle” and “Mid High Step Kit” which allow you to easily load luggage, both the atmosphere and the ride comfort have been improved.

 

(For other complete samples, click here)

Custom List

FrontHandlebars, F forks, headlights, etc.

Front Fork

◯ As an additional custom, we cut and smoothed unnecessary stays on the front fork bottom case. We finished it with a polish. We also chrome-plated the under bracket (lower side of the stem).

Fork boots, general-purpose

〇 Classic universal fork boots.


Front Wheel

Front 19 Inch Kit SR400/500 for Drum

◯The front wheel is 19 inches. The hub cap is attached to create an atmosphere.

2%er Front Wheel Aluminum Hub Cap Starburst Type [SR400/500]

〇You can change to a classical style by attaching it to the normal drum brake.


Front Fender

Front Iron Fender

◯We mount the classical press-formed fender with a vintage design fender brace.


Headlight

“Sportster Type Headlight Kit ~`02 Bolt-On Black Body/Chrome Visor”

〇A headlight with a visor and a bright H4 bulb. It’s a convenient headlight that can store a lot of wiring in the body.


Handle/Handle Area

◯The handle is a Z-bar.

PAUGHCO type 3inch Square Riser SR400/500

〇A handle post of a very usable height that retains the atmosphere of the time.

Amal type throttle holder, general purpose (for 7/8″)

Amal type slot wire 1100mm ’88~’08

Brake Wire 100mm Long

Clutch Wire 100mm Long

〇We are using each long cable for the simple throttle.

Switch

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on


MOTOR ROCK Decompression lever

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)


Front Blinker

Small Bullet Turn Signal Chrome 4pcs SET General Purpose

〇A classic among classics. A chopper-style blinker.


Speedometer

Mechanical Speedometer 60mm Black Panel 1:4

Universal Speedometer Stay

〇Mounted on the left front side of the gasoline tank, which is inconspicuous and highly visible.


CenterTank, oil tank, seat, step, muffler etc.

Muffler

Slip-On Megaphone Muffler for SR400/500

〇A megaphone muffler that is slip-on mounted on a normal exhaust pipe. It is one of the most bass-heavy among the many aftermarket mufflers.


Step

Mid-High Control Parkerized for SR400/500

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and significantly reduces fatigue.


Seat

“Old School Double Seat”

○ It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.


Electrical Equipment

IC blinker relay wide range specification

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.

Battery Lesser

〇A battery-less kit that is manufactured entirely in Japan.


Gasoline Tank Installation

“Sportster Tank”

◯Reliable 4-point rubber mount support.

Welding nut non-through M8 2p

〇Drill a hole in the gasoline tank body, insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

Weld tab M size 4.5mm thickness 2p

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

Weld tab L size 4.5mm thick steel 2p

〇Used for the rear attachment of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.


Drive System

Front sprocket SR400/500 428-19

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    Rear Fender

    Rear Iron Fender

    ◯A rear fender launched as a replica of the Shovel Sportster era. It is made of steel and is sturdily made.


    Rear Wheel

    16″ Kit Steel Spoke SR400/500 Rear

    〇This is a kit that gives a powerful look, the same size as a typical Harley.

    Drilled plate torque rod SR400/500

    〇This is a drilled design torque rod to avoid interference with the wider tires.


    Rear Shock

    “280mm G-Suspension”

    ●A rear shock that lowers by about 4cm. It moves well among low-down suspensions.


    Sissy Bar

    SR400/500 Sissy Bar Plate Plain Single Unit

    〇A kit to install a convenient sissy bar while naturally hiding the subframe of the SR400/500. The middle option was selected for this vehicle.


    Tail Lamp

    “Sparto Tail Lamp/Polish Japanese Number Standard”

    〇The standard Sparto. Domestic numbers can be installed without modification.


    Rear Blinker

    Small Bullet Turn Signal Chrome 4pcs SET General Purpose

    〇A classic among classics. A chopper-style blinker.


    Drive System

    Rear sprocket SR400/500 428-56

    〇A durable sprocket made of steel.

    O-ring chain 428-130L

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.