#6 SR500Custom Report
A 2%er street custom heavily using original parts
◎『Check out other 2%ER’s unmodified frame custom SR400/500 here』
Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fork】
〇Classic universal fork boots.
【Front Tire】
〇A classic watermelon pattern, a vintage style tire with height.
【Front Fender】
◯We mount the classical press-formed fender with a vintage design fender brace.
【Headlight】
“5.75 inch Bates Light Black Body/Chrome Rim”
〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.
【Handle/Handle Area】
“Amal type throttle holder, general purpose (for 7/8″)”
“Amal type slot wire 1000mm ’88~’08”
“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500”
“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS”
The handle is a Street Rover with a natural curve compared to the original. We use long cables for the simple throttle.
“MOTOR ROCK Decompression lever”
A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)
【Front Blinker】
〇A standard small bullet blinker, black. It is for 10mm diameter mounting.
“Stem Mount Blinker Stay B Type”
〇A small quality stainless stay to mount a 10mm diameter blinker on the side of the stem.
【Speedometer】
CenterTank, oil tank, seat, step, muffler etc.
【Muffler】
『Slip-On Megaphone Muffler for SR400/500』
〇A megaphone muffler that can be slip-on mounted on a standard exhaust pipe. It is one of the most prominent deep bass sounds among the many aftermarket mufflers.
【Seat】
“Slim Double Seat Bates Type Vertical Roll for SR400/500”
You have chosen a slim and simple vertical roll seat, which can be selected from seven types.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
“IC blinker relay wide range specification”
〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.
〇This is a battery-less kit that we manufacture in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19”
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
【Rear Fender】
◯A rear fender launched as a replica of the Shovel Sportster era. It is made of steel and is sturdily constructed.
【Rear Shock】
●A rear shock that lowers by about 4cm. It moves well among low-down suspensions.
【Rear Tire】
〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.
【Tail Lamp】
『Lucas tail lamp with pedestal Japanese standard number size』
◯A tail lamp that is easy to use with a Japanese standard number size, while having the nice atmosphere of an imported body.
【Rear Blinker】
〇A standard small bullet blinker, black. It is a 10mm diameter mount.
【Drive System】
“Rear sprocket SR400/500 428-56”
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.