#51 エストレアCustom Report
Estrella’s Compact Chopper.
Adjusted for owners with lower back pain
While using a soft normal rear shock, the shock mounting position has been changed
The rear has been lowered.
The front fork has also been lowered.
A weak point in customization, the rear wheel has been changed to 16 inches.
This gives the Estrella, which has a weak impression around the rear, a heavy atmosphere.
Adopted FCR carburetor.
Even with 250CC, it will run well.
Custom List
FrontHandlebars, F forks, headlights, etc.
【Headlight】
◯ The headlight is a Sportster model, mounted with a one-off stay.
〇 A headlight with a visor and a bright H4 bulb. It’s a convenient headlight that can store a lot of wiring in the body.
【Handle/Handle Area】
◯The T-bar handle is a one-off stainless steel. The switch, brake master, throttle, and clutch lever have been replaced with smaller ones. The handle area is neat and tidy.
【Front Blinker】
CenterTank, oil tank, seat, step, muffler etc.
【Muffler】
◯Drag pipe mufflers are made individually. They are made from slightly thicker pipes than usual. This makes the vehicle look larger.
【Carburetor】
“FCR carburetor 39φ SR400/500 single unit“
〇The carburetor is FCR-converted. It becomes incomparably faster than the standard. We are custom-making the spigot and fitting it.
“Funnel Net for FCR Carburetor”
〇It’s a net to prevent debris that could cause major damage to the engine, while maintaining smooth air intake resistance.
【Electrical Equipment】
◯The electrical equipment case is made from a modified fire extinguisher. It can easily accommodate the numerous electrical components of an Estrella. In case of any trouble, we have designed it so that you can easily access the fuse holder.
◯The battery has been relocated to a less noticeable location under the swing arm. This also improves maintainability.
『IC blinker relay wide range specification』
〇A wide-range turn signal relay that can be used without any problems with LED turn signals, supporting 1 to 150 watts. It can also be used as a replacement for the original relay.
【Gasoline Tank Installation】
◯ A slim gas tank from Rib Top. It’s a one-off.
“Welding nut non-through M8 2p“
〇 Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.
“Weld tab M size 4.5mm thickness 2p“
〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.
“Weld tab L size 4.5mm thick steel 2p“
〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.
RearFenders, rear shocks, swingarms, etc.
【Rear Shock】
◯The rear shock is genuine. It’s a low-down modification by changing the mounting position.
【Rear Wheel】
◯The rear wheel has been upgraded to 16 inches, making the car look larger.
【Rear Fender】
◯The fender is a Fat Bob. I installed it by flipping it up.
【Rear Blinker】
※Parts Reference may show similar products or products with additional processing.