#348 SR400Custom Report
A chopper style with a simple silhouette, finished with 2%ER’s original parts.
It’s assembled with all unprocessed bolt-on parts, and the owner-specified yellow/red flame pattern is painted on the original gasoline tank by “BACON“.
The front fork, extended by a total of 30cm with long inner tubes and fork joints, is set with a 2° rake triple tree for improved silhouette and handling.
Combined with the sharp acceleration of the FCR carburetor, it’s a fun-to-ride chopper.
■About Vehicle Inspection
.Muffler replacement or core filling
.Addition of left and right mirrors
.Addition of reflectors around the tail lamp, and number light
.Addition of tandem belt (when registered for two-seater)
With the above light work, you can easily clear the vehicle inspection. (A dimension change notification is required for the first time)
◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』
Custom List
FrontHandlebars, F forks, headlights, etc.
●We have extended the front fork by 30cm to make it look like a Chopper, changed to a 2° rake triple tree to maintain nimble handling even with this fork length, and selected small-diameter tires. We have assembled it in the best position for the owner by using a drag bar handle and handle post setback kit.
【Front Fork Area】
“2° Rake Triple Tree” ¥96,000
〇Not only for improving driving performance and reducing fatigue, but also for extending the front wheel forward to enhance the chopper style, this is an aluminum stem. The offset of the wheel position (shortening of the trail width) greatly reduces the heavy handling that is common with long forks.
“10cm Long Fork Joint” ¥17,800
〇High-quality stainless steel fork joint.
“20cm Long Inner Tube” ¥62,000
〇A fork tube kit that allows you to extend the front more safely.
“2%er Tweak Bar (front stabilizer) [SR 400/500]” ¥17,500
〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind the extended fork.
“Welding Side Stand Extension Plate” ¥3,200
〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.
【Front Tire】
“SHINKO flute 3.00-18” ¥12,800
〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.
【Headlight】
“5.75 inch Bates Light Chrome General Purpose” ¥7,245
〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.
“Bottom Mount Light Stay II” ¥2,400
〇A headlight stay that fits well with the chopper style due to its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)
【Handle/Handle Area】
“Narrow Drag Bar Handle”¥6,500
〇A narrow flat handle with a short clamp section.
“Original Handle Post Setback Kit”¥14,000
〇A kit that changes the position of the SR400/500 handlebar to a more comfortable and easy-to-ride position by setting it back 4cm forward and 5.3cm upward.
“Chopper Grip“¥1,500
“Amal type throttle holder, general purpose (for 7/8″)“¥4,180
“Amal type slot wire 800mm ’88~’08“¥2,750
“[Special long brake wire for SR drum brake] 400mm“¥4,800
“100mm Long Clutch Cable“¥2,000
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥3,950
〇Easy to install mini turn signal switch with coupler on
(Different year models, installed with modifications on small headlights)
“MOTOR ROCK Decompression lever” ¥4,500
〇 A decompression lever directly attached to the engine to simplify the handle area.
【Turn Signal】
“Certified Star Beans Turn Signal/Black 2p”¥7,250
〇One of the world’s smallest size E-mark certified, inspection OK ultra-small turn signal
“Universal Turn Signal Stay 10A Type Black”¥2,200
〇A mounting stay that fits our “Star Beans Turn Signal” and other “A Type Turn Signals“. It is for a mounting side hole diameter of 10mm (3/8 inch).
※This vehicle is mounted on the front side of the lower engine mount.
【Speedometer】
“Minimeter Fork Mount Kit SR400/500 XS650 #2%er Original #SR400/500” ¥15,800
◯It is a clamp to attach a 48mm meter to the front fork.
“Extension meter cable joint” ¥1,900
〇Used when extending the fork or relocating the meter.
CenterTank, oil tank, seat, step, muffler etc.
●With a simple drag pipe muffler, a comfortable seat, an FCR carburetor that dramatically changes acceleration, and a step kit that makes for a cool and less tiring riding position, we’ve created a style that’s fun to ride.
【 Muffler 】
“Torque cone drag pipe muffler SR400/500” ¥42,000
〇This is a full exhaust muffler with a torque cone developed in-house in the mouthpiece.
“Low Pass Baffle” ¥8,000
◯The inside is equipped with a volume sound torque-up inner silencer, “Low Pass Baffle”.
【Step】
“Mid-High Step Kit Chrome for SR400/500” ¥71,500
〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and significantly reduces fatigue.
【Seat】
” Slim Double Seat Bates Type Vertical Roll for SR400/500” ¥38,000
〇The narrow seat that fits within the frame width is an original vertical type that focuses on comfort.
【Carburetor】
“FCR carburetor 39φ SR400/500 single unit” ¥71,000
〇Your slow SR will be dramatically transformed. It’s a carburetor that’s easy to handle with sharp and smooth acceleration.
“Funnel Net for FCR Carburetor” ¥3,900
〇It’s a set of stainless steel trash prevention nets that fit between the body and the funnel.
“Manifold Kit for FCR39φ” ¥12,000
〇It’s a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.
【Electrical Equipment】
“SR400/500 Under Seat Electrical Plate” ¥8,600
〇2%ER original, under seat electrical plate that can accommodate a battery for SR400/500
~You can make the area under the seat of carburetor models up to ‘2008 completely empty.
“IC blinker relay wide range specification” ¥2,400
〇A wide range blinker relay that can handle 1-150 watts without any problem even for LED blinkers. It can also be used as a replacement for the original relay.
“Battery Lesser” ¥3,400
〇This is a battery-less kit that we manufacture in Japan.
【Engine Area】
“Breather filter SR400/500” ¥3,500
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19” ¥2000
〇A durable replacement sprocket made of steel
RearFenders, rear shocks, swingarms, etc.
●Added a low-down rear shock, tail lamp, turn signals, and a sissy bar.
We’ve finished it nicely with the bare minimum parts.
【Rear Shock】
“280mm G-Suspension/Chrome” ¥28,875
〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Sissy Bar】
“YAMADA Long Sissy Bar (Sissy Bar) Bolt-On Kit” ¥52,000
〇The sissy bar kit with the old school design. It’s a combination of hole plate and YAMADA design.
【Tail Lamp】
“Vintage Lucas Type Tail Lamp”¥7,600
〇An old Lucas replica tail with a large Lucas and an aluminum base with a crest.
“Number Plate Reinforcement Aluminum Back Plate”¥1,500
〇An extremely simple back plate that is attached with double-sided tape. It is made of 2mm thick aluminum with high durability.
【Rear Blinker】
“Certified Star Beans Blinker/Black 2p”¥7,975
● One of the world’s smallest size E-mark certified, ultra-small blinkers that are inspection OK.
“Universal Number Side Blinker Stay A Type”¥2,800
● A mounting stay that fits our “Star Beans Blinker” and other ‘A Type Blinkers‘. It is for a mounting side hole diameter of 10mm (3/8 inch).
【Drive System】
“Rear sprocket SR400/500 428-56” ¥4,800
〇A durable sprocket made of steel.
“O-ring chain 428-130L” ¥11,603
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.































