FrontHandlebars, F forks, headlights, etc.

●A new fork outer spring kit for the separate handlebars, all brought together with a unique front-end styling.

【Front Fork】

“Fork boots, general-purpose” ¥2,800

〇Classic universal fork boots.

【Headlight】

“4.5 inch Bates Light Black General Purpose” ¥5,980

“Bottom Mount Light Stay II” ¥2,400

〇The headlight stay, with its moderate height and protrusion, suits the chopper style well.

【Handle/Handle Area】

“CHUCK BOX Ace Bar Handle”¥21,000

● Extremely thick stainless steel, extremely simple handmade separate handle. (Use by cutting the length)

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,180

● A very simple classic vintage style throttle.

“Chopper Grip”¥1,500

“Amal type slot wire 800mm ’88~’08” ¥2,750

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500” ¥2,000

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS” ¥2,000

“Handle Lock Weld On Kit” ¥4,200

● It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever” ¥4,500

A decompression lever directly attached to the engine to simplify the handle area.

【Stem】

“2%er Top Bridge Ⅰ for separate handle [SR400/500]” ¥16,500

〇A classic style top bridge without a post hole for the bar handle. (The meter stays are smoothed for a simpler finish)

【Speedometer】

“Minimeter Fork Mount Kit SR400/500 XS650 #2%er Original #SR400/500” ¥15,800

◯It is a clamp to attach a 48mm meter to the front fork.

【Front Blinker】

“Certified Star Beans Blinker/Black 2p”¥7,975

〇One of the world’s smallest size, certified with E-mark, inspection OK ultra-small blinker.

“Universal Blinker Stay 10A Type Black”¥2,200

〇A mounting stay compatible with our “Star Beans Blinker” and other “A Type Blinkers“. It is for mounting side hole diameter 10mm (3/8 inch).

CenterTank, oil tank, seat, step, muffler etc.

●The frame under the seat has been cut from the original part, and considering strength, precision, durability, and maintainability, it has been rebuilt to match the angle of the “Hardtail Kit” at the rear.

【Seat】

“Narrow Type Bates Replica Solo Seat, Black, Flat Base” ¥16,000

● A narrow solo/pillion pad with a flat base. Despite being made of vinyl leather, it has a nice atmosphere. By changing the spring input position and setting the mounting angle, it is hard to bottom out and get tired in a typical Japanese body shape.

“Narrow Bates Replica Solo Seat Dedicated 2-Inch Spring Comfort Mount Kit” ¥17,000

● You can install it with a unique 2%ER setting that is not easily tired, such as changing the spring input position and setting the angle.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit” ¥71,000

〇Your slow SR will be dramatically transformed. This is an easy-to-handle carburetor with sharp and smooth acceleration.

“Net funnel set for FCR carburetor” ¥10,900

〇This is a set of an aluminum funnel to replace the red plastic one, and a stainless steel trash guard net.

“Manifold Kit for FCR39φ” ¥12,000

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

【Electrical Equipment】

『SR400/500 Custom Electrical Plate #2%er Original #SR400/500』¥4,200

〇All electrical components except for the CDI are consolidated at the rear of the engine crankcase. It is easily accessible from either side of the vehicle, making it easy to maintain. There is no need to reassemble even when returning to swing arm specifications for vehicle inspection.

 『IC blinker relay wide range specification』¥2,400

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even with LED turn signals. It can also be used as a replacement for the original relay.

『Battery Lesser』¥3,800

〇This is a battery-less kit that we manufacture in Japan.

【Ignition】

“Custom Ignition Switch Bolt-On Kit”¥6,600

〇This is a kit to attach a small ignition switch to your preferred position with an M6 bolt.

【Engine】

『Breather filter SR400/500』¥3,500

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19” ¥2,000

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●A hardtail kit (13cm long) that determines the overall styling, with a sturdy steel rib fender and a simple rear area without a sissy bar.

【Hardtail】

『“Rigid Line” Bolt-On Hardtail Kit』(13cm long, made-to-order) ¥78,000

〇As the name suggests, it’s a hardtail kit that can be attached and detached with bolts/nuts. It remodels the seat rail of the original frame to make it a rigid line. You can revert to a swing arm/rear shock specification when you change the style or during vehicle inspection.

【Rear Fender】

“5-Inch Custom Rib Fender – Steel Material” ¥15,070

“Reinforcement Back Plate for 5-Inch Rib Fender” ¥2,200

〇A thick and durable rib fender. A reinforcement plate is added around the mounting holes for even more robust mounting.

【Tail Lamp】

“69 tail type3” ¥10,000

〇A small stainless steel tail lamp (used by directly welding to a stainless steel fender brace)

“Number Plate Reinforcement Aluminum Back Plate” ¥1,500

〇A 2mm thick aluminum plate for preventing number plate cracks and reinforcing already cracking numbers.

【Rear Blinker】

“Certified Star Beans Blinker/Black 2p”¥7,975

〇World’s smallest size E-mark certified, vehicle inspection OK ultra-small blinker.

“Weld Tab A Type for Blinker Stay”¥2,000

〇Welding stay for up to 6mm mounting blinker.

【Drive System】

“Rear sprocket SR400/500 428-56 ” ¥4,800

〇An affordable and durable replacement sprocket