FrontHandlebars, F forks, headlights, etc.

●The front area has been long-forked to a comfortable length with a 15cm extension, making it easy to ride with a 10-inch pullback handle. A hub cap has been added to the front wheel. The handle area is finished in a very simple style with the adoption of a jockey shift.

---

【Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]” ¥17,800

〇High-quality stainless steel fork joint.

“Front Fork Dust Seal” ¥2,400

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when long-forking.

---

【Handle/Handle Area】

“Vintage Replica 10″ Pullback Handle 22.2mm (7/8″)” ¥10,500

◯A chopper-style vintage replica handlebar with a focus on the angle of rise and the drooping angle of the handle.

“Chopper Grip” ¥1,500

〇A simple and easy-to-grip standard grip.

“Amal type throttle holder, general purpose (for 7/8″)” ¥4,180

〇Small vintage design throttle.

“Throttle Wire 1000mm” ¥2,750

“400mm Long Brake Wire” ¥4,800

“300mm Long Clutch Cable” ¥2,500

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥3,950

〇Mini turn signal switch with easy installation with coupler on

(Different year models, installed with modifications on small headlights)

---

“MOTOR ROCK Decompression lever” ¥4,500

〇Engine direct decompression lever to simplify the handle area.

---

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]” ¥10,000

〇You can change to a classical style by sticking it on the normal drum brake.

---

【Front Tire】

“SHINKO flute 3.00-18” ¥12,800

〇Vertical groove design street tire. It corrects the handling that tends to be heavy when long-forking. It is a small diameter and round 3.00 size.

---

【Headlight】

“5.75 Inch Bates Light HS Type Chrome” ¥10,500

〇A Bates light of the harness storage type for custom vehicles, where many harnesses and couplers can be stored in the light.

“Bottom Mount Light Stay II” ¥2,400

〇A headlight stay that suits the chopper style well with a good height and protrusion.

---

【Front Blinker】

“Small Bullet Blinker/Chrome” ¥7,000

〇Standard small bullet blinker, black. 10mm installation.

“Stem Mount Blinker Stay B Type” ¥2,600

〇A small quality stainless steel stay to mount a blinker with a 10mm installation path on the stem side

---

【Speedometer】

“Left Side Meter Kit for Small Tank” ¥14,900

〇A kit that allows you to install a 60φ meter completely bolt-on in a place that is easy to see and does not stand out when replacing with a sports tank or other small tank.

CenterTank, oil tank, seat, step, muffler etc.

●The center area is filled with various features such as a Sportster tank installed in a particular position, a simple muffler, a comfortable seat, an FCR carburetor that provides sharp acceleration as if you’re riding a different bike, and a jockey shift kit that makes the riding posture cool, comfortable, and easy to operate.

---

【Gasoline Tank】

“Sportster Tank Bolt-On Kit Steel Base SR400/500 for All Years Carburetor Model”￥80,000

〇A bolt-on Sportster tank designed by 2%ER to fit the SR in the best position with a nearly invisible mount stay.

The paint is by Kyoto’s “BACON”

---

【Muffler】

“Torque cone drag pipe muffler SR400/500” ￥42,000

〇A full exhaust muffler with a torque cone developed in-house in the mouthpiece.

---

【Step】

“Mid-High Control Parkerized for SR400/500” ￥64,500

〇A step kit essential for 2%ER’s custom with a cool riding posture and a position that is extremely resistant to fatigue.

---

【Seat】

“Old School Double Seat”￥43,000

〇A standard seat for 2%ER’s normal frame custom, featuring a button-down design that is difficult to express in mass-produced products and a stylish design despite the thick urethane.

---

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit” ￥71,000

〇The slow SR will be dramatically transformed. It’s a carburetor that is easy to handle, with sharp and smooth acceleration and good starting performance.

“Manifold Kit for FCR39φ”￥12,000

〇A dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

“Net funnel set for FCR carburetor” ￥10,900

〇A set of an aluminum funnel changed from a red plastic funnel and a stainless steel trash net.

---

【Electrical Equipment】

“Brat Style Electrical Plate”

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

 “IC blinker relay wide range specification” ￥2,400

〇A wide-range blinker relay that can be used without difficulty even for LED blinkers, compatible with 1-150 watts. It can also be used as a repro for the genuine relay.

“Battery Lesser” ￥3,400

〇A battery-less kit made in Japan.

---

【Engine Area】

“Breather filter SR400/500” ￥3,500

〇A filter kit necessary when removing the genuine air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19” ￥2,000

RearFenders, rear shocks, swingarms, etc.

●Among the low-down suspensions, this is a comfortable 280mm short suspension that protects the ride comfort while tilting the body. It is finished with a nice tail lamp and a sissy bar that makes it easy to tie down luggage.

---

【Rear Shock】

“280mm G-Suspension/Chrome”￥28,875

〇A rear shock that lowers by about 4cm. It moves well among the low-down suspensions. (Removal of the original chain case is necessary)

---

【Sissy Bar】

“SR400/500 Sissy Bar Plate Hole Type Single Unit“￥36,000

◯It is installed to be useful for the owner’s goal of long touring in the future.

---

【Tail Lamp】

“Vintage Lucas Type Tail Lamp”￥7,600

〇A large Lucas with a crest and an aluminum base, an old Lucas replica tail.

“Number Plate Reinforcement Aluminum Back Plate”￥1,500

〇A 2mm thick aluminum plate for reinforcing a number plate that is already starting to crack or to prevent cracking.

---

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear“￥28,000

〇A kit that gives the same size as a typical Harley and adds power

“LOADSTAR TIRE　5.00-16“￥16,500

〇Classic vintage style tire

“Drilled plate torque rod SR400/500“￥6,300

〇A drilled design torque rod that avoids interference with the wider tire.

---

【Rear Blinker】

“Small Bullet Blinker/Chrome”￥7,000

〇A classic small bullet blinker, black. It is a 10mm attachment.

---

“Rear sprocket SR400/500 428-56“￥4,800

〇A durable sprocket made of steel.

“O-ring chain 428-130L“￥11,603

〇A replace drive chain with built-in O-rings.