#309 SR400Custom Report

This is a sleek street-style SR400, made to order in Yamanashi Prefecture, with no frame modifications and all bolt-on parts.

We consulted on the parts to use and balanced the overall look, finishing it so that it can easily pass inspection.


■Vehicle Inspection

.Muffler replaced with a genuine one or filled with a core

.Addition of left mirror

.Reflector added near the number plate

.Addition of tandem belt

That’s all.


◎『Check out other 2%ER’s custom SR400/500 without frame modifications here

Custom List

FrontHandlebars, F forks, headlights, etc.

●The front area has been modified with a 3-inch riser combined with a loose slide bar and a short fender. For the foot area, voluminous tires were chosen, and all other parts such as headlights, meters, and switches are selected to be compact.


Headlight

“5.75 inch Bates Light HS Type Black Body/Chrome Rim Universal” ¥11,550 including tax

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

SR Bottom Mount Light Stay” ¥2,750 including tax

〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.


Handle/Cable Area

“Loose Ride Bar Handle” ¥9,900 including tax

〇A handlebar that suits any style, whether it’s a normal frame or a hardtail, and allows for a cool and comfortable riding posture.

PAUGHCO type 3inch Square Riser SR400/500

〇A handle post of a very usable height, maintaining the atmosphere of the time.

“Barrel Grip” ¥1,650 including tax

Amal type throttle holder, general purpose (for 7/8″)” ¥4,598 including tax

“1000mm Throttle Cable” ¥3,025 including tax

“300mm Long Clutch Cable” ¥2,200 including tax

“300mm Long Brake Cable” ¥2,750 including tax

◯The handle area is a standard clean finish by 2%ER.


[Clean Handlebar Setup]

Switch

“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥4,345 tax included

〇Easy to install mini turn signal switch with coupler on

MOTOR ROCK Decompression lever” ¥4,950 tax included

〇For a clean handlebar setup, it can be directly attached to the engine. This can reduce the decompression cable.


Front Fender

2%er Short Front Fender STD [SR400/500]” ¥13,750 tax included

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original

SR400/500 Front fender upper stay” ¥3,850 tax included

〇A plate to lift and attach the fender when using tires with height


Front Tire

LOADSTAR TIRE 4.00-18” ¥15,400 including tax

〇Classic watermelon pattern, high vintage style tire

2%er Front Wheel Aluminum Hub Cap [SR400/500]” ¥11,000 including tax

〇You can change to a classical style by sticking it on a normal drum brake.


Turn Signal

Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,700 tax included

〇A classic among classics. A chopper-style turn signal.

“Stem Mount Turn Signal Stay B Type” ¥2,860 tax included

〇A high-quality stainless steel mount stay for mounting 10mm turn signals on the stem side.


Meter

Mechanical Speedometer 60mm Black Panel 1:4


CenterTank, oil tank, seat, step, muffler etc.

● A center area well set up with parts that enhance looks, performance, and practicality, such as a never-boring black paint gasoline tank, a well-vented vintage style muffler, an FCR carburetor that dramatically changes the ride, a thin seat, and a seesaw pedal that can be operated by stepping on it.


Muffler

Slip-On Trumpet Muffler Long Bell for SR400/500” ¥39,600 tax included

〇A classical trumpet muffler that slips onto the normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.


Shift

“Seesaw Pedal Kit II” 19,250 yen including tax

○ It is a seesaw-style shifter that allows you to change shifts just by stepping in, without having to lift up on the shift.


Carburetor

FCR carburetor 39φ SR400/500 single unit” ¥84,700 including tax

〇Your slow SR will dramatically change. It’s a carburetor that’s easy to handle, with sharp and smooth acceleration and good startability.

SR400/500 FCR 39φ carburetor mounting adapter set” ¥13,200 including tax

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

“Net Funnel Set for FCR Carburetor” ¥11,990 including tax

〇This is a set of a net and aluminum funnel that avoids debris that could cause major damage to the engine while maintaining smooth air intake resistance.


Seat

Slim Double Seat Bates Type Vertical Roll for SR400/500” ¥41,800 tax included

〇A slim double seat with a simple vertical tuck roll.


Kick Pedal

“Rubber Kick Pedal” 19,800 yen including tax

〇A classical kick pedal that allows you to easily apply your weight due to its wide surface area


Electrical Equipment

“Custom IG Switch Bolt-On Kit” ¥7,260 tax included

● This is a kit that allows you to bolt-on a small ignition to any location.

Brat Style Electrical Plate

● A simple electrical plate that makes it easy to organize harnesses and electrical components.

 “IC blinker relay wide range specification” ¥2,640 tax included

● A wide-range turn signal relay that can be used without difficulty with LED turn signals. It supports 1-150 watts and can also be used as a replacement for the original relay.

Battery Lesser” ¥3,740 tax included

● This is a battery-less kit that we manufacture in Japan.


Engine Area

Breather filter SR400/500” ¥3,850 tax included

〇This is a filter kit needed when removing the original air cleaner.


Drive System

Front sprocket SR400/500 428-19” ¥2,200 tax included

〇A durable replacement sprocket made of steel.


  • RearFenders, rear shocks, swingarms, etc.

    ●Balance the overall look with a lowered rear shock, and mount the classic Lucas tail to the short rear fender in the best position to match the front. A sissy bar kit that can carry a lot of luggage


    Sissy Bar

    SR400/500 Sissy Bar Plate Hole Type Single Unit” ¥39,600 tax included

    〇Old school design with perforated side plates. The design makes it easy to hang hooks.


    Rear Fender

    2%er Rear STD Short Fender [SR400/500]』¥16,500 tax included

    〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.


    Rear Shock

    “Lowdown Rear Shock“ ¥26,000 (excluding tax)

    〇A 280mm rear shock made by Daytona. It lowers the height by about 4cm (removal of the original chain case is necessary).

    ※At 2%ER, we usually use the following rear shocks.

    “280mm G-Suspension/Chrome“ ¥26,250 (excluding tax)

    〇A rear shock that lowers the height by about 4cm. Among lowdown suspensions, it moves well. (removal of the original chain case is necessary)


    Tail Lamp

    “Vintage Lucas Type Tail Lamp” ¥8,360 tax included

    〇An old Lucas replica tail with a large Lucas and an aluminum base with a crest.

    “Number Plate Reinforcement Aluminum Back Plate

    〇A 2mm thick aluminum plate for reinforcing number plates that are already starting to crack or to prevent cracking.


    Rear Tire

    LOADSTAR TIRE 4.50-18』 ¥14500 (excluding tax)

    〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.


    Rear Blinker

    Small Bullet Turn Signal Chrome 4pcs SET General Purpose” ¥7,700 tax included

    〇A classic among classics. A chopper-style blinker.


    Rear sprocket SR400/500 428-56” ¥5,280 tax included

    〇A durable sprocket made of steel.


    O-ring chain 428-130L” ¥12,764 (tax included)

    〇A replacement drive chain with built-in O-rings.

    ※Parts Reference may show similar products or products with additional processing.