#259 SR400Custom Report
Order from Nara Prefecture. With the normal frame as it is, it’s a classic 2%ER street style that never gets old, with voluminous feet, simple and compact exterior parts, and a neatly finished handle area.
The gasoline tank is painted black in almost the standard complete specification. The mid-high step kit is an additional option.
“Check out other 2%ER street bobber custom samples here”
◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』
Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fork】
〇Classic universal fork boots.
【Front Fender】
“2%er Short Front Fender STD [SR400/500]“
〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.
“SR400/500 Front fender upper stay“
〇A plate to lift and attach the fender when using tires with height (height).
【Front Tire】
〇A classic watermelon pattern, high vintage style tire.
【Headlight】
“5.75 inch Bates Light Black Body/Chrome Rim”
〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.
【Handle/Handle Area】
◯Selected a black body handle that is hard to find good ones.
“Amal type throttle holder, general purpose (for 7/8″)“
“Amal type slot wire 900mm ’88~’08“
“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“
“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“
〇Using each long cable with a simple throttle.
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇A mini turn signal switch that is easy to install with a coupler on
(It is installed with modifications for different model years and small headlights)
“MOTOR ROCK Decompression lever“
A decompression lever directly attached to the engine to simplify the area around the handle.
【Front Blinker】
〇A standard small bullet blinker, black. It is a 10mm diameter mount.
“SR400/500 Stem Mount Winker Stay B Type“
〇A high-quality stainless stay to mount a 10mm diameter blinker on the side of the stem.
【Speedometer】
CenterTank, oil tank, seat, step, muffler etc.
●The gasoline tank is tightened with normal black paint, and by neatly handling the harnesses and such, it is finished more simply.
【Muffler】
『Slip-On Megaphone Muffler for SR400/500』
〇A reverse cone muffler that is slip-on mounted on a normal exhaust pipe. It is one of the most prominent deep bass sounds among the many aftermarket mufflers.
【Step】
“Mid-High Control Parkerized for SR400/500“
〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.
【Seat】
“Old School Double Seat II SR400/500“
○ It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
“IC blinker relay wide range specification“
〇A wide-range blinker relay that can handle 1-150 watts without any difficulty, even for LED blinkers. It can also be used as a replacement for the original relay.
〇This is a battery-less kit that we manufacture in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
Appropriately lowered, rear fender that’s not too short, and other selected parts considering the overall balance
【Rear Shock】
〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Rear Fender】
『2%er Rear STD Short Fender [SR400/500]』
〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.
【Rear Tire】
〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.
【Tail Lamp】
“Sparto Tail Lamp/Polish Japanese Number Standard”
〇The standard Sparto. Domestic numbers can be installed without modification
【Rear Blinker】
〇A standard small bullet blinker, black. It is a 10mm diameter mount.
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.