FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]”

〇High-quality stainless steel fork joint.

“2%er Tweak Bar (front stabilizer) [SR 400/500]”

〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind with extended forks.

“Fork boots, general-purpose”

〇Classic universal fork boots.

【Front Fender】

“Front Iron Fender”

◯We mount the classical press-formed fender with a vintage design fender brace.

【Headlight】

◯ The front area has a chopper-like face with the “Dixie Dual Light Kit” (discontinued) for square eyes with two lights.

Similar products are here↓

“Dual Light Kit Vintage Style Square Light #2%er Original #SR400/500”

◯ A square eye two-light kit using the Vintage Style Square Light Kit.

【Handle/Handle Area】

◯Stainless one-off handle.

“Amal type throttle holder, general purpose (for 7/8″)”

“Chopper Grip Black 22.2mm 7/8inch”

“Amal type slot wire 1200mm ’88~’08”

“[Special long brake wire for SR drum brake] 400mm”

“Clutch Wire 200mm Long”

〇We use long cables for the simple throttle.

“MOTOR ROCK Decompression lever”

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Front Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose”

“Diamond Blinker Stay”

◯The blinker is attached to the bottom of the frame.

【Speedometer】

“Minimeter Fork Mount Kit SR400/500 XS650 #2%er Original #SR400/500”

◯ You can set the meter in a visible place without disturbing the style, with free rotation and up and down sliding.

“Extension meter cable joint”

〇 It is used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off pipe production exhaust flange set for SR”

“Fishtail End Tip”

〇A one-off fishtail muffler made using a convenient production kit for the mouthpiece at the root.

【Step】

“Mid-High Control Parkerized for SR400/500”

〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.

【Seat】

“Old School Double Seat”

〇It’s a standard seat for 2%ER’s normal frame custom, with features like a button-down that’s hard to express in mass-produced items, and a thick urethane design that still looks stylish.

【Electrical Equipment】

“Brat Style Electrical Plate”

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification”

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser”

〇A battery-less kit that is manufactured entirely in Japan.

【Gasoline Tank Installation】

“Sportster Tank”

◯We add mounting stays to the frame side by welding, and securely and safely install it with a four-point rubber mount.

“Welding nut non-through M8 2p”

〇Drill a hole in the gasoline tank body and insert and weld it. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p”

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p”

〇Used for the rear installation of the gas tank. This also enlarges the hole diameter and uses it as a rubber mount.

【Engine Area】

“Breather filter SR400/500”

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19”

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Wheel】

『Drilled plate torque rod SR400/500』

〇It is a torque rod with a drilled design to avoid interference with the wider tires.

【Rear Fender】

“Rear Iron Fender”

◯A rear fender launched as a replica of the Shovel Sportster era. It is made of steel and is sturdily constructed.

【Rear Shock】

“280mm G-Suspension”

〇A rear shock that is about 4cm lower. It moves well among low-down suspensions.

【Sissy Bar】

“Sissy Bar Bolt-On Kit (Long)”

〇A kit to install a convenient sissy bar while naturally hiding the subframe of the SR400/500. You can choose from three different heights.

【Tail Lamp】

“Tombstone taillight”

◯A classic of the old school. Comes with a number light function.

【Rear Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose”

【Drive System】

“Rear sprocket SR400/500 428-56”

〇A durable sprocket made of steel.

“O-ring chain 428-130L”

〇A replacement drive chain with built-in O-rings.