#228 SR400Custom Report
This is a SR400 custom in a “chop cafe style”, which is a mix of street style with volume at the feet and cafe racer style with smaller, simpler exterior parts.
For the owner who ordered from Osaka, we used the new bolt-on “Solo Saddle Seat Kit/Black” and arranged long-selling hit products such as front and rear fenders and slip-on mufflers in a balanced manner, making it simpler than the same style we have made in the past.
【Detailed Introduction Video】

【Driving Video】

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』
Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Tire】
◯ A classic watermelon pattern, a vintage style tire with height.
【Front Fender】
“2%er Short Front Fender STD [SR400/500]“
〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.
“SR400/500 Front fender upper stay“
〇A plate to lift and attach the fender when using tires with height (height).
【Headlight】
“7 inch Lucas Type Headlight Case Black“
〇Headlight case with an old English Lucas company design.
〇High-quality stainless steel pipe stay. It is installed a bit lower.
【Handle/Handle Area】
“2%er Stainless Steel Separate Handle“
“Top Bridge for Separate Handle”
〇Classic style top bridge without holes for bar handle.
“Amal type throttle holder, general purpose (for 7/8″)“
〇A very simple, classic vintage style throttle.
【Switch】
“Mini Turn Signal Switch Coupler On Kit (’85~00)”
〇Easy to install mini turn signal switch with coupler on
(Different model years, installed with modifications on small headlights)
〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.
【Speedometer】
“Mechanical Speedometer 60mm Black Panel 1:4“
〇It is mounted on the left front side of the gasoline tank where it is inconspicuous and has high visibility. Combined with the relocation of the main key and the neat handling around the handle, it creates a sense of street style.
【Front Blinker】
〇A standard small bullet blinker, black. It is a 10mm diameter mount.
“SR400/500 Bottom Mount narrow blinker stay“
〇A stay to mount a 10mm blinker to the bottom of the frame.
CenterTank, oil tank, seat, step, muffler etc.
•The gasoline tank is a standard sportster type.
【Muffler】
〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.
【Seat】
“Solo Saddle Seat Kit Black SR400/500“
◯ It is a bolt-on design for SR400/500 of the regular product “Narrow Type Bates Replica Solo Seat, Black, Flat Base“.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
〇This is a battery-less kit that is made entirely in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
【Rear Shock】
〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Rear Tire】
〇The rear wheel is a standard 18-inch, with a selected vintage style, watermelon pattern classical tire.
【Rear Fender】
『2%er Rear STD Short Fender [SR400/500]』
〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.
【Tail Lamp】
〇A classic simple Sparto tail lamp. It is in black.
【Rear Blinker】
〇A classic among classics. A chopper-style blinker.
“Rear Bottom Mount Blinker Stay”
〇A stay to attach the blinker to the swing arm.
【Drive System】
『Rear sprocket SR400/500 428-56』
〇A durable sprocket made of steel.
〇A replaced drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.