FrontHandlebars, F forks, headlights, etc.

【Front Fork】

◯The front fork is lowered by 3cm. The fork bottom case is steak cut and smoothed / black painted.

“Fork boots, general-purpose“

〇Classic universal fork boots.

【Front Wheel】

◯Normal 18-inch wheel hub, rim painted in black.

【Headlight】

“4.5 inch Bates Light Black General Purpose“

◯Only the rim has been changed to chrome.

“SR Bottom Mount Light Stay“

〇It is installed with a headlight stay that is mounted low and close to the vehicle body.

【Handle, Around the Handle】

◯The handle is one-off. It was made to fit the owner’s physique by bending and welding stainless steel. The top bridge of the XS type is finished with smoothing & polishing. Simple embedded switch.

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1200mm ’88~’08“

“Brake Wire 300mm Long“

“Clutch Wire 200mm Long“

〇We are using each long cable for the simple throttle.

“Handle Lock Weld On Kit“

〇It is newly installed by welding to the lower part of the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Front Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the bottom of the frame.

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, where it is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“One-off pipe production exhaust flange set for SR“

“Universal Trumpet Muffler“

〇A one-off made using a convenient manufacturing kit for the mouthpiece at the root. A steel hand-bent exhaust pipe that embodies the owner’s commitment.

【Seat】

◯The genuine leather Bates type seat is one-off. A suspension for bicycles is installed under the seat for a comfortable ride.

Similar products are here↓

“BATES Type Genuine Leather Solo Saddle Seat Vertical Tuck Roll Black/White“

〇A solo saddle seat made of genuine leather that balances price, looks, and comfort.

【Seat Rail】

◯Seat Rail Drop Processing By bending the rear rail forward, it allows for further lowering.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇A battery-less kit made entirely in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, it is welded and installed under the left side of the seat.

【Gasoline Tank Installation】

◯ One-off peanut tank, 3-point rubber mount.

“Welding nut non-through M8 2p“

〇 Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Wheel】

“16″ Kit Steel Spoke SR400/500 Rear“

〇This is a kit that gives a powerful look with the same size as a typical Harley.

“LOADSTAR TIRE　5.00-16“

〇A classic vintage-style tire.

“Drilled plate torque rod SR400/500“

〇This is a drilled design torque rod to avoid interference with the wider tire.

【Rear Shock】

“280mm G-Suspension/Black”

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

【Rear Fender】

◯One-off rear fender.

【Rear Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“Weld tab S size 4.5mm thick steel 2p“

〇Welded onto a hardtail. Used as a blinker base.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.