FrontHandlebars, F forks, headlights, etc.

【Front Tire】

【LOADSTAR TIRE 4.00-18】

◯ A classic watermelon pattern, a vintage style tire with height.

---

【Front Fender】

“CHUCK BOX Front short fender Stainless steel for SR400/SR500“

◯This is a very carefully crafted handmade piece made from checkbox.

“SR400/500 Front fender upper stay“

〇A plate to lift and attach the fender when using tires with height (height).

---

【Headlight】

5.75 inch Bates Light Chrome General Purpose

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

“SR Bottom Mount Light Stay“

〇A classic headlight that fits well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts close to the vehicle body.

---

【Handle/Handle Area】

“2%er Stainless Steel Separate Handle“

“Top Bridge for Separate Handle”

〇Classic style top bridge without post holes for bar handle.

“Amal type throttle holder, general purpose (for 7/8″)“

〇A very simple, classic vintage style throttle.

“Amal type slot wire 900mm ’88~’08“

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

---

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)

---

【Front Blinker】

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm blinker to the bottom of the frame.

---

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, which is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

【Step/Shift】

◯The shift seesaw pedal is also made according to the owner’s request. It’s a popular menu at 2%ER.

---

【Subframe】

◯Cut the subframe and set a small exterior.

---

【Seat】

◯The solo/pillion seat is one-off.

---

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can handle 1-150 watts and can be used without difficulty even with LED turn signals. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇A battery-less kit that is manufactured entirely in Japan.

“Custom ignition switch bolt-on kit General-purpose“

〇The main key, which is originally attached to the top bridge, is easy to operate even while riding and is attached to the lower right of the seat.

---

【Gasoline Tank Installation】

“Sportster Tank”

“Welding nut non-through M8 2p“

〇Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇Used for the rear installation of the gas tank. This also enlarges the hole diameter and uses it as a rubber mount.

---

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

“G-SUSPENSION 265mm Black Low Down Suspension“

---

【Rear Tire】

“LOADSTAR TIRE 4.50-18“

〇A classic vintage style with a watermelon pattern. It’s a rear tire with height and volume.

---

【Rear Fender】

“5 Inch Flat Fender Material”

〇A classic, simple flat rear fender.

---

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.