FrontHandlebars, F forks, headlights, etc.

【Front Fork】

“Fork boots, general-purpose“

〇Classic universal fork boots.

---

【Front Fender】

“2%er Short Front Fender STD [SR400/500]“

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.

“SR400/500 Front fender upper stay“

〇A plate to lift and attach the fender when using tires with height (height).

---

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]“

〇You can attach it to a normal drum brake to change to a classical style.

---

【Front Tire】

『LOADSTAR TIRE 4.00-18』

〇A classic watermelon pattern, a vintage style tire with height.

---

【Headlight】

“5.75 inch Bates Light Black General Purpose“

“SR Bottom Mount Light Stay“

〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.

---

【Handle/Handle Area】

“Street Low Handle Black“

◯ A black body handle that is hard to find a good one. It’s an easy-to-handle handle.

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1100mm ’88~’08“

“Brake Wire 100mm Long“

“Clutch Wire 100mm Long“

〇 We are using each long cable for the simple throttle.

---

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

---

【Front Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the bottom of the frame.

---

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Slip-On Trumpet Muffler”

〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.

---

【Seat】

“Slim Double Seat Bates Type Vertical Roll for SR400/500“

〇You have chosen a slim and simple vertical roll seat, which can be selected from 7 types.

---

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit that is made entirely in Japan.

---

【Side Cover】

“STD side cover SR400/500“

◯ It’s a classical side cover with a round shape.

---

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

『280mm Low Down Suspension】G-SUSPENSION280【Black】General-purpose』

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

---

【Rear Fender】

『2%er Rear STD Short Fender [SR400/500]』

〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.

---

【Rear Tire】

“LOADSTAR TIRE 4.50-18“

〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.

---

【Tail Lamp】

“Sparto Tail Lamp/Black”

〇A classic simple Sparto tail lamp. It is in black.

---

【Rear Blinker】

“Small Bullet Turn Signal Chrome 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“Rear Bottom Mount Blinker Stay”

〇A stay to attach the blinker to the swing arm.

---

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.